Nortel Networks 2300 Series Set radius server, WSS# set radius proxy port 3-4 tag 104 ssid mycorp

500RADIUS and Server Groups Commands

tag tag-value		802.1Q tag value in packets sent by the third-party AP for the SSID.
ssid ssid-name		SSID supported by the third-party AP.
Defaults	None.
Access	Enabled.

History Introduced in WSS Software 4.0.

Usage AAA for third-party AP users has additional configuration requirements. See the “Configuring AAA for Users of Third-Party APs” section in the “Configuring AAA for Network Users” chapter of the Nortel WLAN 2300 System Software Configuration Guide.

Enter a separate command for each SSID, and its tag value, you want the WSS to support.

Examples The following command maps SSID mycorp to packets received on port 3 or 4, using 802.1Q tag value 104:

WSS# set radius proxy port 3-4 tag 104 ssid mycorp

success: change accepted.

See Also

•clear radius proxy port on page 485

•set authentication proxy on page 190

•set radius proxy client on page 489

set radius server

Configures RADIUS servers and their parameters. By default, the WSS automatically sets all these values except the password (key).

Syntax set radius server server-name[address ip-address][auth-port port-number][acct-port port-number] [timeout seconds] [retransmit number] [deadtime minutes]

[[key string] [encrypted-key string]] [author-password password]

server-name	Unique name for this RADIUS server. Enter an alphanumeric string of
	up to 32 characters, with no blanks.

address ip-address

auth-portport-number acct-portport-number timeout seconds

IP address of the RADIUS server. Enter the address in dotted decimal notation.

UDP port that the WSS uses for authentication and authorization.

UDP port that the WSS uses for accounting.

Number of seconds the WSS waits for the RADIUS server to respond before retransmitting. You can specify from 1 to 65,535 seconds.

retransmit number Number of transmission attempts made before declaring an unresponsive RADIUS server unavailable. You can specify from 1 to 100 retries.

NN47250-100 (Version 02.51)