Nortel Networks 2300 Series manual Soda failure-page, Soda remediation-acl, Soda success-page

254AP Commands

soda failure-page		Resets the page that is loaded when a client fails the
		checks performed by the SODA agent. By default, the
		page is generated dynamically.
soda remediation-acl		Disables use of the specified remediation ACL for the
		service profile. When no remediation ACL is specified, a
		client is disconnected form the network when it fails
		SODA agent checks.
soda success-page		Resets the page that is loaded when a client passes the
		checks performed by the SODA agent. By default, the
		page is generated dynamically.
soda logout-page		Resets the page that is loaded when a client logs out of
		the network. By default, the client is disconnected from
		the network without a page being loaded.
Defaults	None.
Access	Enabled.
History
Version 4.1		Options added to clear SODA parameters.

Usage If the service profile is mapped to a radio profile, you must remove it from the radio profile first. (After disabling all radios that use the radio profile, use the clear radio-profilename service- profile name command.)

Examples The following commands disable the radios that are using radio profile rp6, remove service-profile svcprof6 from rp6, then clear svcprof6 from the configuration.

WSS# set radio-profile rp6 mode disable

WSS# clear radio-profile rp6 service-profile svcprof6 success: change accepted.

WSS# clear service-profile svcprof6 success: change accepted.

•clear radio-profile on page 242

•set radio-profile mode on page 291

•show service-profile on page 380

NN47250-100 (Version 02.51)