Nortel Networks 2300 Series manual Show rfdetect counters, Show rfdetect countermeasures Output

RF Detection Commands 533

Table 3: show rfdetect countermeasures Output

Field	Description
Rogue MAC	BSSID of the rogue.
Type	Classification of the rogue device:
	• rogue—Wireless device that is on the network but
	is not supposed to be on the network.
	• intfr—Wireless device that is not part of your
	network and is not a rogue, but might be causing
	RF interference with AP radios.
	• known—Device that is a legitimate member of the
	network.
Countermeasures Radio MAC	MAC address of the Nortel radio sending countermeasures
	against the rogue.
WSS-IPaddr	System IP address of the WSS that is managing the AP that is
	sending or will send countermeasures.
Port/Radio/Channel	Port number, radio number, and channel number of the
	countermeasures radio. For a AP, the connection number is
	labeled ap. (This stands for ap.)

See Also set radio-profile countermeasures on page 287

show rfdetect counters

Displays statistics for rogue and Intrusion Detection System (IDS) activity detected by the APs managed by a WSS.

Syntax show rfdetect counters

Defaults None.

Access Enabled.

History Introduced in WSS Software 4.0.

Examples The following command shows counters for rogue activity detected by a WSS:

WSS# show rfdetect counters

TypeCurrent Total

-------------------------------------------------- ------------ ------------

Rogue access points	0	0
Interfering access points	139	1116
Rogue 802.11 clients	0	0
Interfering 802.11 clients	4	347
802.11 adhoc clients	0	1
Unknown 802.11 clients	20	965
Interfering 802.11 clients seen	0	0
on wired network

Nortel WLAN—Security Switch 2300 Series Command Line Reference