Nortel Networks 2300 Series manual Dhcp, Boot delete, Syntax dhcp on on OFF off, Boot dhcp

Boot Prompt Commands 601

Examples To remove the currently active boot profile, type the following command:

boot> delete

BOOT Index: 1

BOOT TYPE: c

DEVICE: boot1:

FILENAME: default

FLAGS: 00000000

OPTIONS: run=nos;boot=0

See Also

•change on page 588

•create on page 590

•next on page 595

•show on page 596

dhcp

Displays or changes the state of the DHCP option. The DHCP option controls whether a WSS uses DCHP to obtain its IP address when it is booted using a TFTP server.

Syntax dhcp [ON on OFF off]

ON	Enables the DHCP option.
on	Same effect as ON.
OFF	Disables the DHCP option.
off	Same effect as OFF.

Defaults The DHCP option is disabled by default.

Access Boot prompt.

Examples The following command displays the current setting of the DHCP option:

boot> dhcp

DHCP is currently enabled.

The following command disables the DHCP option:

boot> dhcp

DHCP is currently disabled.

See Also boot on page 587

Nortel WLAN—Security Switch 2300 Series Command Line Reference