Nortel Networks 2300 Series manual Show qos dscp-table, See Also show qos dscp-table on

106Quality of Service Commands

Ingress QoS Classification Map (dscp-to-cos)

Ingress DSCP CoS Level

===============================================================================

00-09	0	0	0	0	0	0	0	0	1	1
10-19	1	1	1	1	1	1	2	2	2	2
20-29	2	2	2	2	3	3	3	3	3	3
30-39	3	3	4	4	4	4	4	4	4	4
40-49	5	5	5	5	5	5	5	5	6	6
50-59	6	6	6	6	6	6	7	7	7	7
60-63	7	7	7	7
Egress QoS Marking Map (cos-to-dscp)
CoS Level			0	1		2		3	4	5	6	7

===============================================================================

Egress DSCP	0	8	16	24	32	40	48	56
Egress ToS byte	0x00	0x20	0x40	0x60	0x80	0xA0	0xC0	0xE0

See Also show qos dscp-table on page 96

show qos dscp-table

Displays a table that maps Differentiated Services Code Point (DSCP) values to their equivalent combinations of IP precedence values and IP ToS values.

Syntax show qos dscp-table

Defaults None.

Access Enabled.

History Introduced in WSS Software Version 4.0 as the show security acl dscp command and renamed in WSS Software Version 4.1.

Examples The following command displays the table:

WSS# show qos dscp-table

DSCP	TOS	precedence tos
dec hex	dec hex

------------------------------------------------------

0	0x00	0	0x00	0	0
1	0x01	4	0x04	0	2
2	0x02	8	0x08	0	4
...
63 0x3f		252 0xfc		7	14

See Also show qos on page 95

NN47250-100 (Version 02.51)