Nortel Networks 2300 Series manual Clear rfdetect ignore, Clear rfdetect ssid-list

RF Detection Commands 523

clear rfdetect ignore

Removes a device from the ignore list for RF scans. WSS Software does not generate log messages or traps for the devices in the ignore list.

Syntax clear rfdetect ignore mac-addr

mac-addr	Basic service set identifier (BSSID), which is a MAC address, of the
	device to remove from the ignore list.

Defaults None.

Access Enabled.

History Introduced in WSS Software Version 3.0.

Examples The following command removes BSSID aa:bb:cc:11:22:33 from the ignore list for RF scans:

23x0# clear rfdetect ignore aa:bb:cc:11:22:33

success: aa:bb:cc:11:22:33 is no longer ignored.

See Also

•set rfdetect ignore on page 515

•show rfdetect ignore on page 526

clear rfdetect ssid-list

Removes an SSID from the permitted SSID list.

Syntax clear rfdetect ssid-list ssid-name

ssid-name SSID name you want to remove from the permitted SSID list.

Defaults None.

Access Enabled.

History Introduced in WSS Software Version 4.0.

Examples The following command clears SSID mycorp from the permitted SSID list:

WSS# clear rfdetect ssid-list mycorp

success: mycorp is no longer in ssid-list.

See Also

•set rfdetect ssid-list on page 517

•show rfdetect ssid-list on page 530

Nortel WLAN—Security Switch 2300 Series Command Line Reference