Nortel Networks 2300 Series manual IP Services Commands

107

IP Services Commands

Use IP services commands to configure and manage IP interfaces, management services, the Domain Name Service (DNS), Network Time Protocol (NTP), and aliases, and to ping a host or trace a route. This chapter presents IP services commands alphabetically. Use the following table to locate commands in this chapter based on their use.

IP Interface	set interface on page 109
	set interface dhcp-client on page 110
	set interface status on page 112
	show interface on page 149
	show dhcp-client on page 145
	clear interface on page 99
System IP Address	set system ip-address on page 141
	clear system ip-address on page 106
IP Route	set ip route on page 116
	show ip route on page 153
	clear ip route on page 101
SSH Management	set ip ssh server on page 119
	set ip ssh on page 118
Telnet Management	set ip telnet on page 120
	set ip telnet server on page 120
	show ip telnet on page 155
	clear ip telnet on page 102
HTTPS Management	set ip https server on page 116
	show ip https on page 152
DNS	set ip dns on page 113
	set ip dns domain on page 114
	set ip dns server on page 115
	show ip dns on page 151
	clear ip dns domain on page 100
	clear ip dns server on page 101
IP Alias	set ip alias on page 113
	show ip alias on page 150
	clear ip alias on page 100

Nortel WLAN—Security Switch 2300 Series Command Line Reference