Nortel Networks 2300 Series manual Clear spantree portcost, Clear spantree portpri

400STP Commands

clear spantree portcost

Resets to the default value the cost of a network port or ports on paths to the STP root bridge in all VLANs on a WSS.

Syntax clear spantree portcost port-list

port-list	List of ports. The port cost is reset on the specified ports.
Defaults	None.
Access	Enabled.

Usage This command resets the cost in all VLANs. To reset the cost for only specific VLANs, use the clear spantree portvlancost command.

Examples The following command resets the STP port cost on ports 5 and 6 to the default value:

WSS# clear spantree portcost 5-6 success: change accepted.

See Also

•clear spantree portvlancost on page 391

•set spantree portcost on page 395

•set spantree portvlancost on page 397

•show spantree on page 400

•show spantree portvlancost on page 406

clear spantree portpri

Resets to the default value the priority of a network port or ports for selection as part of the path to the STP root bridge in all VLANs on a WSS.

Syntax clear spantree portpri port-list

port-list	List of ports. The port priority is reset to 32 (the default) on the specified
	ports.
Defaults	None.
Access	Enabled.

Usage This command resets the priority in all VLANs. To reset the priority for only specific VLANs, use the clear spantree portvlanpri command.

Examples The following command resets the STP priority on port 9 to the default:

WSS# clear spantree portpri 9 success: change accepted.

NN47250-100 (Version 02.51)