Nortel Networks 2300 Series manual Show rfdetect ssid-list

540RF Detection Commands

Table 6: show rfdetect mobility-domain ssid or bssid Output (continued)

Field	Description
Crypto-Types	Encryption type:
	•	clear (no encryption)
	•	ccmp
	•	tkip
	• wep104 (WPA 104-bit WEP)
	• wep40 (WPA 40-bit WEP)
	• wep (non-WPA WEP)
WSS-IPaddress	System IP address of the WSS that detected the rogue.
Port/Radio/Channel	Port number, radio number, and channel number of the radio that
	detected the rogue. For a AP, the connection number is labeled
	ap. (This stands for ap.)
Mac	MAC address of the radio that detected the rogue.
Device-type	Device type detected by the AP radio.
Adhoc	Ad-hoc status (yes or no) detected by the AP radio.
Crypto-Types	Encryption type detected by the AP radio.
RSSI	Received signal strength indication (RSSI)—the strength of the
	RF signal detected by the AP radio, in decibels referred to
	1 milliwatt (dBm).
SSID	SSID mapped to the BSSID.

See Also

•show rfdetect data on page 524

•show rfdetect visible on page 531

show rfdetect ssid-list

Displays the entries in the permitted SSID list.

Syntax show rfdetect ssid-list

Defaults None.

Access Enabled.

History Introduced in WSS Software Version 4.0.

Examples The following example shows the permitted SSID list on a WSS:

WSS# show rfdetect ssid-list Total number of entries: 3

SSID

-----------------

NN47250-100 (Version 02.51)