How to Delay the Start of Cleaning
Make sure the clock shows the correct time of day.
Latch the door.
Turn the Oven Temperature knob to CLEAN.
On some models, you must push the knob in before turning.
Press the START TIME ON/OFF pad.
Press the HOUR and MIN. pads to set the time cleaning will start.
When the CLEAN light flashes, slide the latch handle to the left as far as it will go and turn the Oven Temperature knob to OFF.
Safety Instructions Operating Instructions Care and Cleaning
After a Clean Cycle
You may notice some white ash in the oven. Wipe it up with a damp cloth after the oven cools.
If white spots remain, remove them with a soap- filled steel wool pad and rinse thoroughly with a vinegar and water mixture.
These deposits are usually a salt residue that cannot be removed by the clean cycle.
If the oven is not clean after one clean cycle, repeat the cycle.
■You cannot set the oven for cooking until the oven is cool enough for the door to be unlatched.
■While the oven is
■If the shelves become hard to slide, apply a small amount of vegetable oil or cooking oil to a paper towel and wipe the edges of the oven shelves with the paper towel.
Troubleshooting Tips Customer Service
17
