Show interface, WSS# show interface | Nortel Networks 2300 Series

IP Services Commands 159

Table 4.Output for show dhcp-server verbose (continued)

Field	Description

Subnet Mask	Network mask of the IP address leased to the client.

Default Router	Default router IP address included in the DHCP Offer to the client.

DNS Servers	DNS server IP address(es) included in the DHCP Offer to the client.

DNS Domain Name	Default DNS domain name included in the DHCP Offer to the client.

show interface

Displays the IP interfaces configured on the WSS.

Syntax show interface [vlan-id]

vlan-id

VLAN name or number.

Defaults If you do not specify a VLAN ID, interfaces for all VLANs are displayed.

Access All.

History

Version 4.0

RIB field added.

Usage The IP interface table flags an address assigned by a DHCP server with an asterisk ( * ). Examples The following command displays all the IP interfaces configured on a WSS:

WSS# show interface

VLAN Name Address Mask Enabled State RIB

---- --------------- --------------- --------------- ------- ----- ------------ -----

1 default	10.10.10.10	255.255.255.0	YES	Up	ipv4
2 mauve	10.10.20.10	255.255.255.0	NO	Down ipv4
4 corpvlan	*10.3.1.110	255.255.255.0	YES	Up	ipv4

Table 21 describes the fields in this display.

Nortel WLAN—Security Switch 2300 Series Command Line Reference

Page 159

Image 159

Nortel Networks 2300 Series manual Show interface, See Also set interface dhcp-server on, Syntax show interface vlan-id

Contents

Page Copyright 2007-2008 Nortel Networks. All rights reserved Nortel Networks software license agreement Legal Information Exclusive Remedy Software License Agreement Page SSH Source Code Statement OpenSSL Project License Statements NN47250-100 Version How to get help Introducing the Nortel Wlan 2300 System NN47250-102 Version Getting help from the Nortel web site How to get help How to get help NN47250-100 Version Nortel Wlan 2300 System Documentation Introducing the Nortel Wlan 2300 System Planning, Configuration, and Deployment InstallationConfiguration and Management Safety and Advisory Notices Menu Name Command Bold textItalic text CLI Conventions Using the Command-Line Interface Command Prompts Clear fdb dynamic port port-list vlan vlan-id Set enablepassSet port enable disable port-list Clear interface vlan-idip MAC Address Notation MAC Address Wildcards Port Lists Command-Line Editing Using CLI Help Set ap port-list ap-numname name WSS# show i?WSS# show ip ? WSS# show ip telnet Using the Command-Line Interface NN47250-100 Version See Also enable on Access CommandsDisable Enable Quit Set enablepassSyntax set enablepass WSS# set enablepass Enter old password old-password Disable on Enable on Access Commands NN47250-100 Version Clear ap on Port CommandsPort Type Set port type ap on Set ap on Clear port type on Clear port counters Clear ap Clear port media-type Clear port-group Clear port name Clear port mirror Syntax clear port type port-list Network Port DefaultsConfiguration from all the specified ports Clear port type Set port type ap on Set port type wired-auth on Monitor port countersWSS# clear port type WSS# monitor port counters Key Controls for Monitor Port Counters Display Output for monitor port counters Displayed for All OptionsOctets Number of packets received that were 64 bytes long See Also show port counters on Reset portSyntax reset port port-list WSS# reset port See Also set port on Set ap 2350-1 to 2382-1 to2380-1 to 2360/61-1 to See Also reset port on Set portSet port-group Syntax set port-group name group-nameport-listmode on off WSS# set port-group name server1 1-5 mode onMode on off Set port media-type Syntax set port mirror source-portobserver observer-port Set port mirrorSyntax set port media-type port-listrj45 2380# set port media-type 2 rj45 Syntax set port port name name WSS# set port 17 name adminpoolSet port name WSS# set port 1 observer Set port poe Set port negotiation Syntax set port speed port-list10 100 1000 auto WSS# set port poe 7,9 disableWSS# set port poe 7,9 enable Set port speed Set port type ap Syntax set port trap port-listenable disableWSS# set port trap 17-18 enable Set port trap Port-list List of physical portsRadiotype 11a 11b 11g Radio type Version New values for model option added AP Access Port Defaults WSS# set ap 1 radio 1 antennatype Set port type wired-authWSS# set port type ap 2 model 2330 poe enable WSS# set port type ap 4-6 model 2330 poe enable Web-portal Wired Authentication Port DefaultsLast-resort None Port port-list WSS# set port type wired-authShow port counters Clear port type on Set port type ap on Syntax show port-group name group-name Show port-groupOutput for show port-group WSS show port counters octets port Output for show port media-type GBIC-The Gbic fiber interface is enabledRJ45-The RJ-45 copper interface is enabled Show port media-type Show port poe Show port mirror See Also set port poe on Output for show port poe WSS# show port status Show port statusOutput for show port status Syntax show port status port-list No connector-GBIC slot is empty Up-The port is enabledDown-The port is disabled Wa-Wired authentication port System Services Commands Clear banner motd Clear historySee Also history on Wildebeest# clear prompt success change accepted. WSS# Clear promptClear system Syntax clear prompt None HelpWSS# clear system location Help See Also clear history on Set auto-configHistory Quickstart Syntax set auto-config enable disable 2360# set vlan 1 port 7 success change accepted WSS# set auto-config enable success change acceptedWSS# save config Set banner motd Set length Set confirm Syntax set license activation-key Set licenseSyntax set length number-of-lines WSS# set length Syntax set prompt string Set promptSet system contact See Also show licenses on 23x0#set system country code CA Set system countrycode23x0#set system contact tamara@example.com Syntax set system countrycode code WSS# set system idle-timeout Set system idle-timeoutSee Also show config on Syntax set system idle-timeout seconds Set system location Set system ip-address Syntax set system name string Set system name See Also set license on Show banner motdShow licenses Show load Syntax show system Show license commandShow system See Also show system on Show system output Show tech-support System Services Commands System Services Commands NN47250-100 Version Vlan Commands WSS# clear fdb port 3,5 Clear fdbWSS# clear fdb static vlan blue WSS# clear fdb dynamic All Clear security l2-restrictClear security l2-restrict counters Syntax clear security l2-restrict counters vlan vlan-idall Vlan-id Port port-list Clear vlanWSS# clear security l2-restrict counters vlan abcair Syntax clear vlan vlan-id port port-list tag tag-value WSS# clear vlan red port 4 tag Set vlan port on Show vlan config onSet fdb WSS# clear vlan green port Set fdb agingtime Set security l2-restrictSee Also show fdb agingtime on Mode Enable disableSet vlan name Syntax set vlan vlan-numname name Syntax set vlan vlan-id port port-list tag tag-value Set vlan portSee Also set vlan port on WSS# set vlan 3 name marigold Syntax set vlan vlan-idtunnel-affinity num Set vlan tunnel-affinityShow fdb WSS# set vlan beige port 16 tag WSS# show fdb WSS# show fdb all WSS# show fdb agingtime Show fdb agingtimeOutput for show fdb Syntax show fdb agingtime vlan vlan-id See Also show fdb on Show fdb countShow roaming station See Also set fdb agingtime on Show roaming vlan Output for show roaming stationSee Also show roaming vlan on WSS# show roaming vlan Syntax show roaming vlan Syntax show security l2-restrict vlan vlan-idall Show roaming station on Show vlan config onShow security l2-restrict Output for show roaming vlan Output for show security l2-restrict Enabled. Forwarding of Layer 2 traffic from clients isDisabled. Layer 2 forwarding is not restricted Show tunnel Output for show tunnel Show vlan configSee Also show vlan config on Syntax show vlan config vlan-id Output for show vlan config See Also Vlan Commands NN47250-100 Version Clear qos Quality of Service Commands Syntax set qos cos-to-dscp-map level dscp dscp-value Set qos cos-to-dscp-mapWSS# clear qos WSS# clear qos dscp-to-qos-map Show qos Set qos dscp-to-cos-map Show qos dscp-table See Also show qos dscp-table onSee Also show qos on IP Services Commands Show ntp on Set ntp update-interval onSet ntp on Set ntp server on Clear interface Syntax clear interface vlan-idipWSS# clear interface mauve ip Clear ip dns domain Clear ip alias WSS# clear ip dns server Clear ip dns serverClear ip route Syntax clear ip dns server ip-addr WSS# clear ip telnet success change accepted Clear ip telnetClear ntp server Syntax clear ip telnet Clear snmp community Clear ntp update-intervalSyntax clear ntp update-interval WSS# clear ntp update-interval success change accepted Syntax clear snmp notify target target-num Clear snmp notify profileClear snmp notify target Syntax clear snmp notify profile profile-name Clear summertime Clear snmp usm Clear timezone Clear system ip-address Ping Host Count num-packetsCount-5 Syntax set arp permanent static dynamic ip-addrmac-addr Set arpSee Also traceroute on WSS# ping WSS# set arp agingtime Set arp agingtimeSet interface Syntax set arp agingtime seconds Set interface dhcp-client WSS# set interface default ip 10.10.10.10/24Syntax set interface vlan-idip dhcp-client enable disable Enables the Dhcp client on the Vlan Clear interface on Show dhcp-client on Show interface on WSS# set interface corpvlan ip dhcp-client enableDefault-router ip-addr Set interface dhcp-server Primary-dns and secondary-dns Default-routerSet interface status Dns-domain Syntax set ip alias name ip-addr Syntax set ip dns enable disableSet ip alias Set ip dns WSS# set ip dns domain example.com WSS# set ip dns enableSet ip dns domain Syntax set ip dns domain name Secondary Set ip dns serverSyntax set ip dns server ip-addrprimary secondary Primary Set ip https server Syntax set ip https server enable disableWSS# set ip https server enable Enable Enables the Https server Disable WSS# set ip route default 10.5.4.1 WSS# set ip route 192.168.4.0 255.255.255.0 10.5.4.2WSS# set ip route 192.168.5.0/24 10.5.5.2 Set ip ssh Syntax set ip snmp server enable disableWSS# set ip snmp server enable Set ip snmp server Crypto generate key on Set ip ssh on Set ip ssh server on Syntax set ip ssh server enable disableSet ip ssh server WSS# set ip ssh port Syntax set ip telnet port-num Syntax set ip telnet server enable disableSet ip telnet Set ip telnet server Enable Enables the NTP client Disable WSS# set ip telnet server enableSyntax set ntp enable disable WSS# set ntp enable Set ntp server Set ntp update-interval Set snmp community WSS# set snmp community name switchmgr1 notify-read-write Read-notify Notify-only Notify-read-writeWSS# set snmp community read-write goodcommunity Default profile-name Set snmp notify profileDrop send ApOperRadioStatusTraps-Generated when AutoTuneRadioPowerChangeTraps-GeneratedClientAuthorizationSuccessTraps-Generated ClientAuthenticationFailureTraps-Generated Cont RFDetectUnAuthorizedSsidTraps-Generated RFDetectSpoofedSsidAPTraps-Generated when See Also Show snmp notify profile on Snmp-engine-id Security unsecured authenticated encryptedSet snmp notify target SNMPv3 with Informs SNMPv3 with Traps Security unsecured authenticated encryptedTimeout num Retries num SNMPv2c with Informs Community-string Community string Profile profile-nameSNMPv2c with Traps SNMPv1 with Traps WSS# set snmp notify target 2 10.10.40.10 v1 trap V2c Syntax set snmp protocol v1 v2c usm all enable disableWSS# set snmp protocol all enable Set snmp protocol Set snmp security Set snmp usmWSS# set snmp security encrypted Allow get and set operations and so on Snmp-engine-id ip ip-addr local hex hexSpecifies a unique identifier for the Snmp String Engine Specifies the access level of the user Auth-pass-phrase string option Second , third , fourth , or last Set summertimeWSS# set snmp usm snmpmgr1 snmp-engine-id local Start 23x0# set summertime PDT success change accepted EndEnd of the time change period Yyyy-year Set timedateMmm-month Dd-day Set timezone Syntax set timezone zone-name -hours minutes23x0# set timezone PST WSS# show arp Show arpOutput for show arp Syntax show arp ip-addr Show dhcp-client WSS# show dhcp-client Output for show dhcp-client WSS# show dhcp-server Show dhcp-serverSee Also set interface dhcp-client on Syntax show dhcp-server interface vlan-id verbose Output for show dhcp-server verbose Output for show dhcp-server WSS# show interface Show interfaceSee Also set interface dhcp-server on Syntax show interface vlan-id Output for show interface Show ip alias Syntax show ip dns Show ip dnsOutput for show ip alias Output for show ip dns Show ip https Show ip httpsWSS show ip https Destination Show ip routeOutput for show ip https Syntax show ip route destination Output for show ip route Show ip telnet Show ip telnetWSS show ip telnet WSS show ntp Show ntpOutput for show ip telnet Syntax show ntp Synced Output for show ntp Show snmp community Show snmp countersShow snmp notify profile Syntax show snmp status Show snmp notify targetShow snmp status Syntax show snmp notify target 23x0# show summertime Show snmp usmShow summertime Syntax show summertime Show timezone Show timedate WSS-remote show vlan TelnetSyntax telnet ip-addr hostname port port-num WSS# telnet WSS-remote Session 0 pty tty2.d terminated tt name tty2.d Traceroute Error Messages for traceroute See Also ping onWSS# traceroute server1 AAA Commands Clear accounting Syntax clear accounting admin dot1x system user-wildcard System Clear authentication adminSyntax clear authentication admin user-wildcard WSS# clear accounting dot1x Nin WSS# clear authentication console Regina Clear authentication consoleWSS# clear authentication admin Jose Syntax clear authentication console user-wildcard Wired Clear authentication dot1xClear authentication last-resort WSS# clear authentication dot1x ssid finance *@thiscorp.com WSS# clear authentication proxy ssid mycorp Clear authentication macClear authentication proxy WSS# clear authentication mac ssid thatcorp aabbcc Syntax clear location policy rule-number Clear authentication webSet authentication proxy on Show aaa on Clear location policy Syntax clear mac-user mac-addr Clear mac-userClear mac-user attr WSS# clear location policy Syntax clear mac-user mac-addrgroup Clear mac-user groupSyntax clear mac-usermac-addr attr attribute-name WSS# clear mac-user 010203040506 attr filter-id WSS# clear mac-usergroup eastcoasters Clear mac-usergroupClear mac-usergroup attr Syntax clear mac-usergroup group-name Clear user Clear mobility-profile Syntax clear user username attr attribute-name WSS# clear user Hosni attr session-timeoutClear user attr WSS# clear user Nin Clear usergroup Clear user group WSS# clear usergroup cardiology attr time-of-day Set accounting admin consoleClear usergroup attr Syntax clear usergroup group-name attr attribute-name Method1 Method2 Method3 Method4 WSS# set accounting admin Natasha start-stop localSet accounting dot1x mac web last-resort Start-stop Stop-only Ssid ssid-name Method1 method2 method3 method4Mac Web Set accounting system WSS# set accounting dot1x Nin stop-only sg2WSS# set accounting system shorebirds For more information, see Usage Set authentication admin WSS# set authentication admin Jose sg3 Set authentication console User-wildcard Method1 Method2 Method3 Method4 WSS# set authentication console * none Set authentication dot1x Already been authenticated Or a period .. For details, see User Wildcards onBonded Protocol Method1 Method2 Method3 Method4 Sg1 sg2 sg3 success change accepted Wired Set authentication last-resortSet authentication mac Set service-profileauth-fallthru on Show aaa on WSS# set authentication ssid mycorp2 mac ** local Set authentication proxy WSS# set authentication proxy ssid mycorp ** srvrgrp1 Set authentication web WSS# set authentication web ssid ourcorp rnd* local Optionally, you can add the suffix .out to the name Set location policyDeny Permit Neq-Applies the location policy rule to all usernames Show location policy commandClear location policy rule-numbercommand Eq-Applies the location policy rule to all usernames Clear location policy on Show location policy on Set mac-userWSS# set location policy deny if user eq *.theirfirm.com WSS# set location policy permit vlan floor2 if port 3-7,12 Syntax set mac-user mac-addrgroup group-name WSS# set mac-user 010203040506 group eastcoastersClear mac-user on Show aaa on Syntax set mac-usermac-addr attr attribute-name value Set mac-user attr Authentication Attributes for Local Users Encryption-typeEnd-date Filter-id Mobility-profileMobility-profile on Ssid Service-typeSession-timeout By the set dot1x reauth-period command is With start-date,end-date, or both Time-of-day1600,th1000-1600 Day wk0900-1700,sa2200-0200 Vlan-name $u-Username $v-VLAN $s-SSID $p-Service profile nameWSS# set mac-user 010203040506 attr filter-id acl-03.in Url Clear mac-user attr on Show aaa on For a list of authorization attributes, see onSet mac-usergroup attr WSS# set mac-usergroup eastcoasters attr vlan-name orange Or wired authentication port on the WSS Ports and wired authentication port on the WSSSet mobility-profile WSS# set mobility-profile name magnolia port Set mobility-profile modeSyntax set mobility-profile mode enable disable WSS# set mobility-profile mode enable Set user Syntax set user username password encrypted stringWSS# set user Nin password goody WSS# set user admin password chey3nne WSS# set user Tamara attr mobility-profile tulip WSS# set user Nin password 29Jan04Set user attr WSS# set user Tamara attr vlan-name orange WSS# set user Hosni group cardiology Set user groupSet usergroup Syntax set user username group group-name Clear usergroup on Clear usergroup attr on Show aaa on Syntax set web-portal enable disableSet web-portal Syntax set usergroup group-name attr attribute-name value Show aaa User Nin Show aaa Output UP operating Show accounting statistics WSS# show accounting statistics Syntax show accounting statistics Show accounting statistics Output Radius serverLocal WSS database Show mobility-profile Show location policy AAA Commands NN47250-100 Version 23x0# clear domain security Mobility Domain CommandsClear domain security Syntax clear domain security See Also set mobility-domain member on Clear mobility-domainClear mobility-domain member Set domain security Syntax set mobility-domain member ip-addrkey hex-bytes Set mobility-domain memberSyntax set domain security none required WSS# set domain security required WSS# set mobility-domain member Set mobility-domain mode member seed-ipSet mobility-domain mode member secondary-seed- ip Clear mobility-domain on Show mobility-domain config on Set mobility-domain mode seed domain-name WSS# set mobility-domain mode member secondary-seed-ipClear mobility-domain member on Show mobility-domain on Show mobility-domain Show mobility-domain configSyntax show mobility-domain config WSS# show mobility-domain config Show mobility-domain Output Syntax show mobility-domainWSS# show mobility-domain Mobility Domain Commands NN47250-100 Version 23x0# clear network-domain Network Domain CommandsClear network-domain Syntax clear network-domain Syntax clear network-domain peer ip-addrall Clear network-domain modeSyntax clear network-domain mode seed member Clear network-domain peer See Also set network-domain peer on Set network-domain mode member seed-ipSee Also set network-domain mode member seed-ip on Clear network-domain seed-ip Clear network-domain on Show network-domain on WSS# set network-domain mode member seed-ipSet network-domain peer Syntax set network-domain peer ip-addr Show network-domain Set network-domain mode seed domain-nameWSS# set network-domain mode seed domain-name California Set network domain peer command Output if WSS is the Network Domain seed Show network-domain OutputSyntax show network-domain WSS# show network-domain Output if WSS is a Network Domain member Network Domain Commands NN47250-100 Version Set ap radio radio-profile on AP CommandsSet ap radio mode on Set ap upgrade-firmware on Set service-profilersn-ie on Set service-profileweb-portal-acl onSet service-profileauth-psk on Set service-profilewpa-ie on Set service-profile psk-raw on Set service-profile cipher-wep104 onSet service-profile cipher-wep40 on Set service-profile psk-phrase on Set ap radio auto-tunemax-power on Set radio-profileauto-tunepower-config onSet radio-profileauto-tunepower-interval on Set radio-profileauto-tunepower-lockdown on Syntax clear ap ap-numberimage Clear ap image See Also set ap image on Clear ap local-switching vlan-profileSyntax clear ap ap-numberlocal-switching vlan-profile WSS# clear ap 7 local-switching vlan-profile Radio Clear ap radioRadio-Specific Parameters Syntax clear ap port-listap ap-numradio 1 2 all Option dap removed for AP 802.11b/g-6802.11a-Lowest valid Channel number for Country of operation Clear ap radio load-balancing group Clear ap boot-configurationSyntax clear ap boot-configuration ap-num WSS# clear ap 1 boot-configuration Clear radio-profile Countermeasures parameter added Clear service-profileLong-retry Short-retry Soda logout-page Soda failure-pageSoda remediation-acl Soda success-page Option radio num auto-tune min-client-rate Reset apSet ap auto Option force-image-download added WSS# set ap auto Configurable Profile Parameters for APs Set ap auto persistent Set ap auto modeSyntax set ap auto mode enable disable WSS# set ap auto mode enable WSS# set ap auto persistent 10 success change accepted Set ap auto radiotype11a-802.11a Syntax set ap auto persistent ap-numall Set ap bias WSS# set ap auto radiotype 11bSyntax set ap port-listap ap-numauto bias high low WSS# set ap 1 bias low See Also show ap config onSyntax set ap port-list ap ap-num auto blink enable disable Set ap blink Enables or disables the static IP address for the AP Set ap boot-configuration ipWSS# set ap 3-4 blink enable Mode enable disable Set ap boot-configuration mesh mode Set ap boot-configuration mesh psk-phraseWSS# set ap 7 boot-configuration mesh mode enable Syntax set ap ap-numberboot-configuration mesh psk-raw hex Set ap boot-configuration mesh psk-raw WSS# set ap 7 boot-configuration mesh ssid wlan-mesh Set ap boot-configuration mesh ssid Switch-ip ip-addr Set ap boot-configuration switch Vlan tag value. You can specify a number from Set ap boot-configuration vlanEnables or disables use of the specified Vlan tag on the AP Vlan-tag tag-value Syntax set ap num fingerprint hex Set ap security on Show ap config on Show ap status onSet ap fingerprint Set ap force-image-download Auto on WSS# set ap 69 force-image-download enableSet ap group Syntax set ap port-list ap ap-num auto group name WSS# set ap 4 group none Show ap config on Show ap group onSet ap image WSS# set ap 1,4,7 group loadbalance1 WSS# set ap 7 local-switching mode enable Set ap local-switching modeSet ap local-switching vlan-profile Syntax set ap ap-numberlocal-switching mode enable disable WSS# set ap 7 local-switching vlan-profile locals Set ap nameSyntax set ap port-list ap ap-numname name Indoors Set ap radio antenna-locationWSS# set ap 1 name techpubs WSS# set ap 22 radio 1 antenna-location outdoor See Also set ap radio antennatype on Set ap radio antennatype Ap port-list Ap ap-num radio 1 radio Set ap radio auto-tune max-power Deprecated in WSS Software Version WSS# set ap 7 radio 1 auto-tune max-powerSet ap radio auto-tune max-retransmissions Set ap radio auto-tune min-client-rate WSS# set ap 5 radio 1 channel WSS# set ap 11 radio 1 channel 1 tx-powerSet ap radio tx-power on Show ap config on Set ap radio channel Ap ap-number Set ap radio min-tx-datarateSet ap radio link-calibration Set ap radio load-balancing Syntax set ap ap-numradio 1 2 load-balancing enable disable WSS# set ap 7 radio 1 load-balancing disableSet ap radio load-balancing group Set ap radio mode Syntax set ap port-listauto radio 1 2 mode enable disableWSS# set ap 7 radio 1 load-balancing group room1 Radio-profile name WSS# set ap 1-5 radio 1 mode enableWSS# set ap 1-3 radio 2 mode enable Set ap radio radio-profile Set ap radio tx-power Set ap radio channel on Show ap config on WSS# set ap 5 radio 1 tx-power Set ap security Syntax set ap security require optional noneWSS# set ap security none Set ap sticky-bit Set ap upgrade-firmwareSyntax set ap port-listauto upgrade-firmware enable disable WSS# set ap 9 upgrade-firmware disable WSS# set band-preference 11a Set load-balancing modeSyntax set load-balancing mode enable disable Syntax set band-preference none 11bg 11a Max WSS# set load-balancing mode disableSet load-balancing strictness Syntax set load-balancing strictness low med high max WSS# set load-balancing strictness max Syntax set radio-profile name active-scan enable disableSet radio-profile 11g-only Set radio-profile active-scan Set radio-profile auth-psk Set radio-profile auto-tune channel-configWSS# set radio-profile radprof3 active-scan disable Set radio-profile auth-dot1x WSS# set radio-profile rp2 auto-tune channel-config disable Set radio-profile auto-tune channel-holddownWSS# set radio-profile rp2 auto-tune channel-holddown WSS# set radio-profile rp2 auto-tune channel-interval Set radio-profile auto-tune channel-interval Syntax set radio-profile name auto-tune channel-lockdown Set radio-profile auto-tune power-backoff-timerSet radio-profile auto-tune power-config Set radio-profile auto-tune channel-lockdown Started Set radio-profile auto-tune power-intervalWSS# set radio-profile rp2 auto-tune power-config enable Defaults The default power tuning interval is 300 seconds WSS# set radio-profile rp2 auto-tune power-lockdown Set radio-profile auto-tune power-lockdownWSS# set radio-profile rp2 auto-tune power-interval Syntax set radio-profile name auto-tune power-lockdown Syntax set radio-profile name beacon-interval interval Set radio-profile auto-tune power-ramp-intervalWSS# set radio-profile rp2 auto-tune power-ramp-interval Set radio-profile beacon-interval Set radio-profile cipher-wep104 Set radio-profile beaconed-ssidSet radio-profile cipher-ccmp Set radio-profile cipher-tkip Rogue ConfiguredSet radio-profile countermeasures WSS# set radio-profile radprof3 countermeasures rogue Set radio-profile dtim-interval Set radio-profile crypto-ssid Set radio-profile frag-threshold Syntax set radio-profile name frag-threshold thresholdWSS# set radio-profile rp1 frag-threshold Set radio-profile long-retry Set radio-profile max-rx-lifetimeSet radio-profile max-tx-lifetime WSS# set radio-profile rp1 max-tx-lifetime Set radio-profile modeDefaults for Radio Profile Parameters Syntax set radio-profile name mode enable disable Countermeasures Rfid-mode DisableService-profile Wmm-powersave Disable Wmm-powersave 11g-onlyRfid-mode Syntax set radio-profile name preamble-length long short Set radio-profile preamble-lengthSet radio-profile psk-phrase Set radio-profile psk-raw WSS# set radio-profile rp1 qos-mode svp Set radio-profile qos-modeSet radio-profile rate-enforcement Syntax set radio-profile name qos-mode svp wmm Enables data rate enforcement for the radios in the radio Disables data rate enforcement for the radios in the radioSet radio-profile rfid-mode Syntax set radio-profile name rts-threshold threshold Syntax set radio-profile name rfid-mode enable disableWSS# set radio-profile rfid-mode enable Set radio-profile rts-threshold Set radio-profile service-profile Defaults for Service Profile ParametersSyntax set radio-profile name service-profile name Cipher-wep40 Disable Cipher-ccmp DisableCipher-tkip Enable Cipher-wep104 Disable Shared-key-auth Disable No-broadcast DisableProxy-arp Disable Rsn-ie Disable 2.0,5.5,11.0 12.0,24.0Auto 2.0 Web-portal-acl Portalacl Portal-acl settingTimeout Wpa-ie Disable WSS# set radio-profile rp2 service-profile wpaclients Set radio-profile wep active-multicast-index Set radio-profile shared-key-authSet radio-profile short-retry Set radio-profile tkip-mc-time See set service-profilewpa-ie on Set radio-profile wmm-powersaveSyntax set radio-profile name wmm-powersave enable disable WSS# set radio-profile rp1 wmm-powersave enable Set service-profile attr Syntax set service-profile name attr attribute-name valueWSS# set service-prof sp2 attr vlan-name blue WSS# set service-profile wpaclients auth-dot1x disable Set service-profile auth-dot1xWSS# set service-prof sp2 attr mobility-profile tulip Syntax set service-profile name auth-dot1x enable disable Set service-profile auth-fallthru Last-resortWeb-portal WSS# set service-profile wpaclients auth-psk enable Set service-profile auth-pskWSS# set service-profile rndlab auth-fallthru web-portal Syntax set service-profile name auth-psk enable disable Mesh-service-profile Mesh service profile Set service-profile beaconSet service-profile bridging Syntax set service-profile name beacon enable disable Set service-profilecac-session on Show service-profile on Set service-profile cac-modeSyntax set service-profile name cac-mode none session WSS# set service-profile sp1 cac-mode session WSS# set service-profile sp1 cac-session Set service-profile cac-sessionSet service-profile cipher-ccmp Syntax set service-profile name cac-session max-sessions WSS# set service-profile sp2 cipher-tkip disable Set service-profile cipher-tkipWSS# set service-profile sp2 cipher-ccmp enable Syntax set service-profile name cipher-tkip enable disable Set service-profile cipher-wep104 WSS# set service-profile sp2 cipher-wep104 enableEnables 104-bit WEP encryption for WPA clients WSS# set service-profile sp2 cipher-wep40 enable Set service-profile cipher-wep40Set service-profile cos Syntax set service-profile name cipher-wep40 enable disable WSS# set service-profile sp1 dhcp-restrict enable Set service-profile dhcp-restrictSyntax set service-profile name cos level WSS# set service-profile sp1 cos Enables keepalives Set service-profile idle-client-probingSet service-profile keep-initial-vlan WSS# set service-profile sp1 idle-client-probing disable Set service-profile load-balancing-exempt See Also show service-profile onWSS# set service-profile sp3 keep-initial-vlan enable WSS# set service-profile sp1 long-retry-count Set service-profile long-retry-countWSS# set service-profile sp3 load-balancing-exempt enable Syntax set service-profile name long-retry-count threshold Enables mesh services for the service profile Set service-profile meshSet service-profile no-broadcast Syntax set service-profile name mesh mode enable disable Syntax set service-profile name proxy-arp enable disable Set service-profile proxy-arpSyntax set service-profile name no-broadcast enable disable WSS# set service-profile sp1 no-broadcast enable Set service-profile psk-phrase WSS# set service-profile sp1 proxy-arp enableSyntax set service-profile name psk-phrase passphrase Set service-profile psk-raw Set service-profile rsn-ieSyntax set service-profile name psk-raw hex Set service-profile shared-key-auth Syntax set service-profile name rsn-ie enable disableWSS# set service-profile sprsn rsn-ie enable WSS# set service-profile sp1 short-retry-count Set service-profile short-retry-countWSS# set service-profile sp4 shared-key-auth enable Syntax set service-profile name short-retry-count threshold Set service-profile soda agent-directory Set service-profile soda enforce-checksNetwork Set service-profile soda mode on Show service-profile on Set service-profile soda failure-pageWSS# set service-profile sp1 enforce-checks disable Syntax set service-profile name soda failure-page Syntax set service-profile name soda logout-page Set service-profile soda logout-page WSS# set service-profile sp1 soda mode enable Set service-profile soda modeWSS# set service-profile sp1 soda logout-page logout.html Syntax set service-profile name soda mode enable disable Set service-profile soda remediation-acl Set service-profile soda success-pageSyntax set service-profile name soda success-page Set service-profile ssid-name WSS# set service-profile sp1 soda success-page success.htmlSyntax set service-profile name ssid-name ssid-name Syntax set service-profile name ssid-type clear crypto Set service-profile ssid-typeSet service-profile static-cos WSS# set service-profile clearwlan ssid-name guest Syntax set service-profile name tkip-mc-time wait-time Set service-profile tkip-mc-timeSyntax set service-profile name static-cos enable disable WSS# set service-profile sp1 static-cos enable Set service-profile transmit-rates WSS# set service-profile sp3 tkip-mc-time11g-1.0, 2.0, 5.5, 6.0, 9.0, 11.0, 12.0, 18.0 Beacon-rate rate Multicast-rateBeacon-rate WSS# set service-profile sp1 user-idle-timeout Set service-profile user-idle-timeoutSet service-profile web-portal-acl Syntax set service-profile name user-idle-timeout seconds Syntax set service-profile name web-portal-form url Set service-profile web-portal-formSyntax set service-profile name web-portal-acl aclname WSS# set service-profile sp3 web-portal-acl creditsrvr WSS# dir corpa WSS# mkdir corpa WSS# set service-profile sp1 web-portal-logout mode enable Set service-profile web-portal-logoutSet service-profile web-portal-logout logout-url Set service-profile web-portal-session-timeout WSS# set service-profile sp1 web-portal-session-timeout Set service-profile wep active-multicast-index Set service-profile wep active-unicast-index WSS# set service-profile sp2 wep active-multicast-indexWSS# set service-profile sp2 wep active-unicast-index WSS# set service-profile sp2 wep key-index 1 key aabbccddee Set service-profile wep key-indexSet service-profile wpa-ie Syntax set service-profile name wep key-index num key value WSS# show ap arp WSS# set service-profile sp2 wpa-ie enableShow ap arp Syntax show ap arp ap-number Output for show ap arp Show ap configSyntax show ap config port-listradio 1 Set ap local-switching mode on Set vlan-profile WSS# show ap config Output for show ap config 802.11a 802.11b802.11g WSS# show ap counters Show ap unconfigured on Show radio-profile onShow ap counters Syntax show ap counters port-listradio 1 Output for show ap counters Use the show sessions network session-id session-idcommand Output for show ap counters See Also show sessions network on Show ap dual-home WSS# show ap fdb Show ap fdbOutput for show ap fdb Syntax show ap fdb ap-number Show ap qos-stats WSS# show ap qos-statsClears the counters after displaying their current values WSS# show ap etherstats Show ap etherstatsOutput for show ap qos-stats Syntax show ap etherstats port-listap-num Output for show ap etherstats WSS# show ap mesh-links Show ap groupShow ap mesh-links Syntax show ap mesh-links ap-number Terse Show ap statusOutput for show ap mesh-links Syntax show ap status terse port-listall radio 1 Tuning Radio state information, to indicate when anConfigured antenna model number Power settings that are configured by RF Auto WSS# show ap status terse Output for show ap status Image downloaded-The AP has received a boot But has not yet begun bootingBooting-The AP has asked the WSS for a boot Image downloading-The AP is receiving a boot Sweep Mode indicates that a disabled radio is Configure succeed state indicates that the APHas received configuration parameters for Protection mode remains in effect until Radio But no external antenna is configured onAntenna is configured on the radio but no Indicates that an external antenna was detected Output for show ap status terse and show ap status terse Show ap vlan WSS# show ap vlan Set vlan-profile Set ap local-switching mode onOutput for show ap vlan Syntax show ap vlan ap-number WSS# show auto-tune attributes ap 2 radio Show auto-tune attributesOutput for show auto-tune attributes Syntax show auto-tune attributes ap ap-numradio 1 2all Set radio-profileauto-tunepower-backoff-timer on Show auto-tune neighborsSyntax show auto-tune neighbors ap ap-numradio 1 2all Rssi Output for show auto-tune neighbors WSS# show ap boot-configuration Show ap boot-configurationOutput for show ap boot-configuration Syntax show ap boot-configuration ap-num Serial-id serial-ID Show ap connectionSyntax show ap connection ap-numserial-id serial-ID Connection WSS# show ap connection serial-id Show ap config on Show ap global on Show ap unconfigured onOutput for show ap connection WSS# show ap connection Total number of entries WSS# show ap global Show ap globalOutput for show ap global Syntax show ap global ap-numserial-id serial-ID Show ap unconfigured Syntax show ap unconfiguredWSS# show ap unconfigured Show ap connection on Show ap global on Output for show ap unconfiguredThis WSS switch as a member Show load-balancing group Syntax show radio-profile name ? Show radio-profileOutput for show load-balancing group WSS# show load-balancing group blue WSS# show radio-profile default Output for show radio-profile SpectraLink Voice Priority SVP Wmm-AP forwarding queues provide standardPriority handling for WMM devices Svp-AP forwarding queues are optimized for Syntax show service-profile name ? Show service-profile Profile output Unencrypted Output for show service-profileCrypto-Wireless traffic for the Ssid is Clear-Wireless traffic for the Ssid is None-Denies authentication and prohibits Last-resort-Automatically authenticates the userAllows access to the Ssid requested by User, without requiring a username and password Session-CAC is based on the number of active None-CAC is disabledNone-The key is not configured Preset-The key is configured PSK-preshared key authentication Radios in the radio profile mapped to this serviceAuthentication-Lists the authentication methods 802.1X-dynamic authentication FieldDescription AP Commands AP Commands NN47250-100 Version STP Commands Set spantree uplinkfast onShow spantree uplinkfast on Clear spantree portpri Clear spantree portcost Resets the cost for all VLANs Clear spantree portvlancostClear spantree portvlanpri WSS# clear spantree statistics 5,11,19-22 Clear spantree statisticsSyntax clear spantree portvlanpri port-listall vlan vlan-id Syntax clear spantree statistics port-listvlan vlan-id See Also show spantree on Set spantreeSet spantree backbonefast See Also show spantree statistics on Set spantree fwddelay Set spantree helloSee Also show spantree backbonefast on Set spantree portcost Set spantree maxage WSS# set spantree portcost 3,4 cost Snmp Port Path Cost DefaultsSyntax set spantree portfast port port-listenable disable Set spantree portfast Set spantree portpri Set spantree portvlancostSee Also show spantree portfast on Priority value All Set spantree portvlanpriWSS# set spantree portvlancost 3,4 cost 20 vlan mauve Cost cost All Set spantree uplinkfast Set spantree priority See Also show spantree uplinkfast on WSS# set spantree uplinkfast enableWSS# show spantree vlan default Show spantree Bridge Max Age 20 sec Hello Time 2 sec Forward Delay 15 sec Output for show spantree Show spantree backbonefast See Also show spantree blockedports onSyntax show spantree backbonefast WSS# show spantree backbonefast WSS# show spantree blockedports vlan defaultShow spantree blockedports See Also set spantree backbonefast on Uplink fast convergence information for all ports Show spantree portfastSyntax show spantree portfast port-list WSS# show spantree portfast Syntax show spantree portvlancost port-list Show spantree portvlancostOutput for show spantree portfast See Also set spantree portfast on Statistics for all ports Show spantree statisticsSyntax show spantree statistics port-listvlan vlan-id WSS# show spantree statistics Inactive Output for show spantree statistics Output for show spantree statistics Output for show spantree statistics Syntax show spantree uplinkfast vlan vlan-id Show spantree uplinkfastOutput for show spantree uplinkfast See Also clear spantree statistics on See Also set spantree uplinkfast on STP Commands NN47250-100 Version Statistics Show igmp statistics on Clear igmp statistics on Igmp Snooping CommandsClear igmp statistics Syntax clear igmp statistics vlan vlan-id See Also show igmp on Set igmpSet igmp lmqi See Also show igmp statistics on Set igmp mrouter Set igmp mrsolSee Also show igmp mrouter on See Also set igmp mrsol on Set igmp mrsol mrsiSet igmp oqi See Also set igmp mrsol mrsi on Vlan vlan-id Syntax set igmp proxy-report enable disable vlan vlan-idSet igmp proxy-report WSS# set igmp oqi 200 vlan orange Syntax set igmp qi seconds vlan vlan-id WSS# set igmp proxy-report disable vlan orangeSet igmp qi Set igmp qri WSS# set igmp qri 50 vlan orange Syntax set igmp querier enable disable vlan vlan-idSet igmp querier Syntax set igmp qri tenth-seconds vlan vlan-id See Also show igmp receiver-table on Set igmp receiverSet igmp rv See Also show igmp querier on WSS# show igmp vlan orange Show igmpWSS# set igmp rv 4 vlan orange Syntax show igmp vlan vlan-id Dvmrp PIM Output for show igmp Quer-IGMP query Conf Static multicast port configured by anAdministrator Madv-Multicast advertisement Show igmp mrouter Syntax show igmp mrouter vlan vlan-idWSS# show igmp mrouter vlan orange Set igmp mrouter on Show igmp mrouter on Show igmp querierOutput for show igmp mrouter Syntax show igmp querier vlan vlan-id WSS# show igmp querier vlan orange See Also set igmp querier on WSS# show igmp querier vlan defaultShow igmp receiver-table Output for show igmp querier VLANs WSS# show igmp receiver-table vlan orangeWSS# show igmp receiver-table group 237.255.255.0/24 WSS Software displays the multicast receivers on all Syntax show igmp statistics vlan vlan-id Show igmp statisticsOutput for show igmp receiver-table See Also set igmp receiver on Output for show igmp statistics See Also clear igmp statistics on Igmp Snooping Commands NN47250-100 Version WSS# clear sessions console Session Management CommandsWSS# clear sessions admin Clear sessions WSS# clear sessions network mac-addr Clear sessions networkSee Also show sessions on WSS# clear sessions telnet client Show sessions Telnet Console Mac-addr mac-addr Show sessions networkShow sessions telnet client Output See Also clear sessions on Session-id output Verbose output WSS show sessions network verbose WSS show sessions networkWSS show sessions network mac-addr 00055d7e981a WSS show sessions network user E WSS# show sessions network session-id Show sessions network summary Output Description Additional show sessions network verbose AAA-VLAN is from Radius or the local database IP address and port number of the WSS managing the APSerial number and radio number of the AP Amount of time the session has been on this AP Show sessions network session-id Output DOT1X See Also clear sessions network on Session Management Commands NN47250-100 Version Clears all security ACLs Security ACL CommandsClear security acl Syntax clear security acl acl-name all editbuffer-index Set security acl ip acl135 hits #2 WSS# show security acl info allSet security acl ip acl133 hits #1 Set security acl ip acl134 hits #3 Clear security acl map WSS# clear security acl map acljoe port 4Out Type Class Mapping Commit security aclWSS# clear security acl map all Syntax commit security acl acl-nameall Syntax rollback security acl acl-nameall Hit-sample-rateRollback security acl See Also show security acl on Set security acl By UDP packets Any Immediate precedence Minimum delayRoutine precedence Priority precedence WSS# commit security acl all WSS# set security acl ip acl123 deny 192.168.2.11 Tag tag-list Set security acl mapWSS set security acl map acl133 port 4 WSS port or ports Set security acl ip acl153 hits #3 Configuration fileSet security acl hit-sample-rate Syntax set security acl hit-sample-rate seconds Index Counter ACL-name Show security aclShow security acl dscp WSS# show security acl hits WSS# show security acl editbuffer Show security acl editbufferShow security acl hits Syntax show security acl info all editbuffer WSS# show security acl info Show security acl infoSyntax show security acl hits Syntax show security acl info acl-nameall editbuffer Show security acl map Show security acl resource-usage Show security acl resource-usage Output False-No security ACLs are mapped True-A default action types is definedFalse-No default action type is defined True-Security ACLs are mapped False-No security ACLs are mapped to incoming True-Security ACLs are mapped to incoming traffic Cryptography Commands Certificate Crypto ca-certificateEap PEM-formatted WSS# crypto certificate admin Crypto certificateSee Also show crypto ca-certificate on Ssh Crypto generate keyCrypto generate request on Crypto generate self-signed on Domain See Also show crypto key ssh on WSS# crypto generate key adminSyntax crypto generate request admin eap web Crypto generate request Maximum string length for State Name increased WSS# crypto generate request adminEmail Address admin@example.com Webaaa option renamed to web Syntax crypto generate self-signed admin eap web Crypto generate self-signedCrypto certificate on Crypto generate key on WSS# crypto generate self-signed admin Syntax crypto otp admin eap web one-time-passwordCrypto otp WSS# crypto generate otp eap hap9iN#ss Syntax crypto pkcs12 admin eap web file-location-urlCrypto pkcs12 See Also crypto pkcs12 on WSS# crypto pkcs12 eap 2048full.p12 See Also crypto otp onWSS# copy tftp//192.168.253.1/2048full.p12 2048full.p12 WSS# crypto otp eap hap9iN#ss WSS# show crypto ca-certificate Syntax show crypto ca-certificate admin eap webShow crypto ca-certificate Show crypto ca-certificate Output WSS# show crypto certificate eap Syntax show crypto certificate admin eap webShow crypto certificate Crypto certificate Output Show crypto key domain Show crypto key sshSee Also crypto generate key on Cryptography Commands NN47250-100 Version Clear server group on Radius and Server Groups CommandsSyntax clear radius deadtime key retransmit timeout Clear radius Clear radius client system-ip See Also set radius proxy port on Clear radius proxy clientClear radius proxy port See Also set radius proxy client on Clear server group Clear radius server See Also set server group on Set radius Set radius client system-ip WSS# set radius proxy client address 10.20.20.9 key radkey1 Set radius proxy clientSet radius proxy port Syntax set radius proxy client address ip-address Set radius server WSS# set radius proxy port 3-4 tag 104 ssid mycorpSsid ssid-name Ssid supported by the third-party AP Encrypted-key-No key Author-password-nortel Members server Set server group Group-name Server group name of up to 32 characters 23x0# set server group shorebirds load-balance enable23x0# set server group shorebirds load-balance disable Set server group load-balance Radius and Server Groups Commands NN47250-100 Version 802.1X Management Commands WSS# clear dot1x bonded-period Clear dot1x bonded-periodClear dot1x max-req Syntax clear dot1x max-req Clear dot1x port-control Clear dot1x quiet-periodClear dot1x reauth-max Clear dot1x reauth-period Clear dot1x timeout auth-server Clear dot1x tx-period Clear dot1x timeout supplicant Set dot1x bonded-period Syntax set dot1x authcontrol enable disableWSS# set dot1x authcontrol enable Set dot1x authcontrol Set dot1x key-tx Set dot1x max-reqSee Also show dot1x on Set dot1x port-control WSS# set dot1x max-reqWSS# set dot1x port-control forceauth Set dot1x reauth Set dot1x quiet-period Set dot1x reauth-period Set dot1x reauth-max Set dot1x timeout supplicant Set dot1x timeout auth-server Syntax set dot1x tx-period seconds Syntax set dot1X wep-rekey enable disableSet dot1x tx-period Set dot1x wep-rekey Show dot1x Set dot1x wep-rekey-period WSS# show dot1x clients WSS# show dot1x config WSS # show dot1x stats Show dot1x stats Output 520 802.1X Management Commands Show rfdetect visible on RF Detection CommandsRogue Information Show rfdetect clients on Show rfdetect data on Syntax clear rfdetect black-list mac-addr Clear rfdetect attack-listClear rfdetect black-list Syntax clear rfdetect attack-list mac-addr Clear rfdetect ssid-list Clear rfdetect ignore WSS# clear rfdetect vendor-list client aabbcc000000 Clear rfdetect vendor-listSet rfdetect attack-list Syntax clear rfdetect vendor-list client ap mac-addrall Set rfdetect ignore Set rfdetect black-list 23x0# set rfdetect ignore aabbcc112233 Syntax set rfdetect log enable disable23x0# set rfdetect log enable Set rfdetect log Set rfdetect signature Set rfdetect ssid-listSee Also show log buffer on WSS# set rfdetect vendor-list client aabbcc000000 Set rfdetect vendor-listWSS# set rfdetect ssid-list mycorp Syntax set rfdetect vendor-list client ap mac-addr Show rfdetect black-list Show rfdetect attack-list WSS# show rfdetect clients mac 000c4163fd6d Show rfdetect clientsShow rfdetect clients Output Syntax show rfdetect clients mac mac-addr Show rfdetect clients mac Output Show rfdetect countermeasures Syntax show rfdetect countermeasuresWSS# show rfdetect countermeasures Syntax show rfdetect counters Show rfdetect countersShow rfdetect countermeasures Output See Also set radio-profile countermeasures on Syntax show rfdetect data Show rfdetect data Show rfdetect data Output WSS# show rfdetect ignore Total number of entries Show rfdetect ignoreShow rfdetect mobility-domain Syntax show rfdetect ignore WSS# show rfdetect mobility-domain ssid nrtl-webaaa Bssid and ssid options addedVendor, Type, and Flags fields added WSS# show rfdetect mobility-domain Show rfdetect mobility-domain Output Show rfdetect mobility-domain ssid or bssid Output Show rfdetect ssid-list WSS# show rfdetect vendor-list Show rfdetect vendor-listShow rfdetect visible Syntax show rfdetect vendor-list Version Vendor, Type, and Flags fields added Show ap status commandMac-addr Base MAC address of the Nortel radio Shows neighbor information for radio Show rfdetect data on Show rfdetect mobility-domain on RfpingShow rfdetect visible Output Syntax rfping mac mac-addrsession-id session-id WSS# rfping mac 000e9bbfad13 Rfping Output Backup File Management Commands Tftp/ip-addr / filename Syntax backup system tftp/ip-addr/filenameall criticalWSS# backup system tftp/10.10.20.9/sysabak critical Dir on Restore on Clear boot backup-configuration Clear boot configCopy Be one of the following Syntax copy source-url destination-urlSource-url Destination-url WSS# copy tftp//10.1.1.1/closetwss closetwss WSS# copy tftp//10.1.1.107/WSS020101.020 boot1WSS020101.020Delete WSS# copy floorwss tftp//10.1.1.1/floorwss Dir WSS# copy testconfig tftp//10.1.1.1/testconfigWSS# delete testconfig Syntax dir subdirname file core boot0 boot1 WSS# dir WSS# dir oldWSS# dir file WSS# dir core Install soda agentWSS# dir boot0 Output for dir Uninstall soda agent on Set service-profile soda mode on Load configWSS# install soda agent soda.ZIP agent-directory sp1 Syntax load config url Save config on Show boot on Show config on WSS# load configWSS# load config testconfig1 Syntax md5 boot0 boot1filename WSS# mkdir corp2 Pubs# md5 boot0WSS040003.020Mkdir Syntax mkdir subdirname Reset system Syntax reset system forceWSS# reset system Restore Save config See Also backup onRmdir Syntax set boot backup-configuration filename Set boot backup-configurationSyntax save config filename WSS# save config testconfig1 Set boot partition Set boot configuration-file Show boot New fields, Configured boot version and BackupBoot configuration, added Output for show boot Area area Show configSyntax show config area area all Configuration area. You can specify one of the following Show version New options added for remote traffic monitoring snoopRfdevice changed to rfdetect WSS# show version details WSS# uninstall soda agent agent-directory sp1 Uninstall soda agentSee Also show boot on Syntax uninstall soda agent agent-directory directory Install soda agent on Set service-profile soda mode on File Management Commands NN47250-100 Version WSS# clear log trace Trace CommandsClear log trace Syntax clear log trace Save trace Clear trace WSS# save trace traces/trace1 Set trace authenticationSet trace authorization WSS# set trace authentication user jose Level 5 is the default Set trace dot1xUser-readable information. If you do not specify a level WSS# set trace sm mac-addr Set trace sm Show trace Syntax show trace allWSS# show trace WSS# clear snoop snoop1 Snoop CommandsClear snoop Syntax clear snoop filter-name Examples clear snoop map filter-nameap ap-numradio 1 Clear snoop mapWSS# clear snoop map snoop2 ap 3 radio WSS# clear snoop map all Set snoop Set snoop map WSS# set snoop snoop1 observer 10.10.30.2 snap-lengthExamples set snoop map filter-nameap ap-numradio 1 Filter. See show snoop stats on Set snoop modeEnable Stop-after num-pkts WSS# set snoop map snoop1 ap 3 radio WSS# show snoop WSS# set snoop snoop1 mode enable stop-afterShow snoop Syntax show snoop Show snoop map Show snoop info Show snoop stats Clear snoop map on Set snoop map on Show snoop onExamples show snoop stats filter-nameap-numradio 1 Show snoop stats Output Snoop Commands NN47250-100 Version WSS# clear log server System Log CommandsClear log Syntax clear log buffer server ip-addr Logging state enabled or disabled Set logSeverity Defaults Set log mark See Also show log config on Set log trace mbytesShow log buffer Diagnostic purposes. No action is required Reboot or shut downError-The WSS is missing data or is unable to Problems have occurred. These are logged for Show log trace Show log configSyntax show log config WSS# show log config Number of log entries starting from the oldest Conditions are not resolved, the WSS can rebootError-The WSS is missing data or is unable to form Positive number for example, +100, displays that WSS# show log trace +5 facility Rogue WSS# show log trace facility ? System Log Commands NN47250-100 Version Boot Prompt Commands Boot autoboot AutobootSee Also boot on Syntax autoboot on on OFF off Boot Boot boot FN=WSS010101.020 DEV=boot1 ChangeChange on Show on Boot on Create on Delete on Dhcp on Next on Show on Boot change Boot create CreateChange on Delete on Next on Show on Syntax dhcp on on OFF off Boot deleteBoot dhcp Dhcp Fver on Version on Syntax dir c d e f boot0 boot1Boot dir Diag Fver Syntax fver c d e f boot0 boot1 filenameBoot fver boot1 Syntax help command-name See Also ls on Boot help fver See Also help on ResetBoot next Next Show Boot reset Storage or a flash card Compact flash. Boots using nonvolatileBoot show Output for show Secondary partition of the flash card Nonvolatile storage area containing bootPartition Primary partition of the flash card in the flash Version Boot versionEnables the poweron test flag Test Dir on Fver on Numerics Command Index NN47250-100 320658-G Version Delete 539 Command Index 282 340 Command Index Command Index MAC addresses 12 in user globs Vlan globs Command Index NN47250-100 320658-G Version Page Nortel WLAN-Security Switch 2300 Series Release

Nortel Networks 2300 Series manual Show interface, See Also set interface dhcp-server on

Models: 2300 Series