AP Commands 333

set service-profile psk-raw

Configures a raw hexadecimal preshared key (PSK) to use for authenticating WPA clients, in a service profile. Radios use the PSK as a pairwise master key (PMK) to derive unique pairwise session keys for individual WPA clients.

Syntax set service-profile name psk-raw hex

name

Service profile name.

hex

A 64-bit ASCII string representing a 32-digit hexadecimal number. Enter

 

the two-character ASCII form of each hexadecimal number.

Defaults

None.

Access

Enabled.

History Introduced in WSS Software Version 3.0.

Usage WSS Software converts the hexadecimal number into a 256-bit binary number for system use. WSS Software also stores the hexadecimal key in the WSS's configuration. The binary number is never displayed in the configuration.

To use PSK authentication, you must enable it and you also must enable the WPA IE.

Examples The following command configures service profile sp3 to use a raw PSK with PSK clients:

WSS# set service-profile sp3 psk-raw

c25d3fe4483e867d1df96eaacdf8b02451fa0836162e758100f5f6b87965e59d success: change accepted.

See Also

set mac-user attr on page 197

set service-profileauth-psk on page 309

set service-profilepsk-phrase on page 322

set service-profilewpa-ie on page 342

show service-profile on page 380

set service-profile rsn-ie

Enables the Robust Security Network (RSN) Information Element (IE).

The RSN IE advertises the RSN (sometimes called WPA2) authentication methods and cipher suites supported by radios in the radio profile mapped to the service profile.

Nortel WLAN—Security Switch 2300 Series Command Line Reference

Page 333
Image 333
Nortel Networks 2300 Series manual Set service-profile psk-raw, Set service-profile rsn-ie