Before you call for service… | www.GEAppliances.com |
Troubleshooting Tips
Save time and money! Review the charts on the following pages first and you may not need to call for service.
Status Indicators
■Press POWER ON/OFF to turn off the washer.
IE ■ Call for service.
|
| When the cycle has started but water has not filled the wash basket |
FF | within 60 minutes, a signal will sound and this code will be displayed. | |
■ Make sure the incoming water faucets are on. | ||
|
| ■ Make sure the fill hoses are not clogged or kinked. |
|
| |
|
| Power did not automatically turn off at the end of the cycle. |
Po |
| |
■ Press POWER ON/OFF to turn off the washer. | ||
|
|
|
Water is not draining out of the washer.
dr ■ Make sure the drain hose is not kinked and is connected properly.
| Wash load is unbalanced. | |
Ub | ■ Distribute laundry evenly in the basket. | |
■ Make sure washer is level. See Leveling the Washer. | ||
| Washer lid is not closed. | |
Lo | ||
■ Close lid. | ||
| Any time the total time required is more than 99 minutes, | |
| ||
| ||
2h | this status indicator will be displayed. | |
|
|
17
Safety Instructions Operating Instructions Installation Instructions Troubleshooting Tips Consumer Support
