Installation Instructions
WASHER CONNECTIONS FOR PORTABLE MODEL
6MAKE SURE THE TEMPERATURE SELECTOR IS SET AT COLD/COLD
7SLOWLY TURN ON THE WATER FAUCET ALL THE WAY TO THE DESIRED TEMPERATURE SETTING
9REMOVE THE PROTECTIVE FILM COVERING THE CONTROL PANEL
10 INSTALLATION CHECKLIST
Before starting the washer, check to make sure:
❏Main power is turned on.
❏The washer is plugged in.
❏The water faucets are turned on.
❏The unit is level.
❏There are no leaks at the faucet, drain line or washer.
8
PLUG THE POWER CORD INTO A
The electrical power cord is on the back of the washer.
Insure proper ground exists before use
14
