238Network Domain Commands

Syntax set network-domain mode member seed-ip ip-addr[affinity num]

ip-addr

IP address of the Network Domain seed, in dotted decimal notation.

num

Preference for using the specified Network Domain seed. You can specify

 

a value from 1 through 10. A higher number indicates a greater

 

preference.

Defaults The default affinity for a Network Domain seed is 5. Access Enabled.

History Introduced in WSS Software 4.1.

Usage You can specify multiple Network Domain seeds on the WSS. When the WSS needs to connect to a Network Domain seed, it first attempts to connect to the seed with the highest affinity. If that seed is unavailable, the WSS attempts to connect to the seed with the next-highest affinity. After a connection is made to a non-highest-affinity seed, the WSS then periodically attempts to connect to the highest-affinity seed.

Examples The following command sets the WSS as a member of the Network Domain whose seed has the IP address 192.168.1.8:

WSS# set network-domain mode member seed-ip 192.168.1.8

success: change accepted.

The following command sets the WSS as a member of a Network Domain whose seed has the IP address 192.168.9.254 and sets the affinity for that seed to 7. If the WSS specifies other Network Domain seeds, and they are configured with the default affinity of 5, then 192.168.9.254 becomes the primary Network Domain seed for this WSS.

WSS# set network-domain mode member seed-ip 192.168.9.254 affinity 7

success: change accepted.

See Also

clear network-domain on page 225

show network-domain on page 229

set network-domain peer

On a Network Domain seed, configures one or more WSSs as redundant Network Domain seeds. The seeds in a Network Domain share information about the VLANs configured on the member devices, so that all the Network Domain seeds have the same database of VLAN information.

Syntax set network-domain peer ip-addr

ip-addr

IP address of the Network Domain seed to specify as a peer, in dotted

 

decimal notation.

Defaults None.

Access Enabled.

NN47250-100 (Version 02.51)

Page 238
Image 238
Nortel Networks 2300 Series manual Set network-domain peer, WSS# set network-domain mode member seed-ip