Nortel Networks 2300 Series manual Show spantree uplinkfast, Output for show spantree uplinkfast

422STP Commands

Table 4: Output for show spantree statistics (continued)

Field	Description
num of similar BPDU’s to process	Number of similar BPDUs received on a port that need to be
	processed.
received_inferior_bpdu	Indicates whether the port has received an inferior BPDU or a
	response to a Root Link Query (RLQ) BPDU.
next state	Port state before it is set by STP.
src MAC count	Number of BPDUs with the same source MAC address.
total src MAC count	Number of BPDUs with all the source MAC addresses.
curr_src_mac	Source MAC address of the current received BPDU.
next_src_mac	Other source MAC address from a different source.

See Also clear spantree statistics on page 392

show spantree uplinkfast

Displays uplink fast convergence information for one VLAN or all VLANs.

Syntax show spantree uplinkfast [vlan vlan-id]

vlan vlan-id	VLAN name or number. If you do not specify a VLAN, WSS Software
	displays STP statistics for all VLANs.

Defaults None.

Access All.

Examples The following command shows uplink fast convergence information for all VLANs:

WSS# show spantree uplinkfast

VLAN port list

------------------------------------------------------------------------

1 1 (fwd),2,3

Table 62 describes the fields in this display.

	Table 5: Output for show spantree uplinkfast
Field	Description
VLAN	VLAN number.
port list	Ports in the uplink group. The port that is forwarding traffic is
	indicated by fwd. The other ports are blocking traffic.

NN47250-100 (Version 02.51)