Nortel Networks 2300 Series manual Set dot1x timeout auth-server, Set dot1x timeout supplicant

802.1X Management Commands 515

See Also

•clear dot1x reauth-period on page 498

•show dot1x on page 507

set dot1x timeout auth-server

Sets the number of seconds that must elapse before the WSS times out a request to a RADIUS authentication server.

Syntax set dot1x timeout auth-server seconds

seconds	Specify a value between 1 and 65,535.
Defaults The default is 30 seconds.
Access	Enabled.

History Introduced in WSS Software 1.0.

Examples Type the following command to set the authentication server timeout to 60 seconds:

WSS# set dot1x timeout auth-server 60

success: dot1x auth-server timeout set to 60.

See Also

•clear dot1x timeout auth-server on page 498

•show dot1x on page 507

set dot1x timeout supplicant

Sets the number of seconds that must elapse before the WSS times out an authentication session with a supplicant (client).

Syntax set dot1x timeout supplicant seconds

seconds	Specify a value between 1 and 65,535.
Defaults The default is 30 seconds.
Access	Enabled.

History Introduced in WSS Software 1.0.

Examples Type the following command to set the number of seconds for authentication session timeout to 300:

WSS# set dot1x timeout supplicant 300

success: dot1x supplicant timeout set to 300.

Nortel WLAN—Security Switch 2300 Series Command Line Reference