HP LaserJet 5500 To set the job storage limit, To set the job held timeout, OFF, Note, Note, MENUS, 1 DAY, MENUS, 1 HOUR, 1 WEEK, CAUTION, 4 HOURS, SYSTEM SETUP, SYSTEM SETUP

Changing printer control panel configuration settings

	By using the printer control panel, you can make changes to general printer configuration
	default settings such as tray size and type, PowerSave Time, printer personality (language),
	and jam recovery.
	The printer control panel can also be accessed from a computer by using the setting page of
	the embedded Web server. The computer shows the same information that the control panel
	shows. For more information, see Using the embedded Web server.
	Configuration settings seldom need to be changed. Hewlett-Packard recommends that only
CAUTION
	the system administrator change configuration settings.

Note

Note

Job storage limit

This option sets the limit for the maximum number of jobs stored on the hard disk at the printer. The maximum number allowed is 100, and the default value is 32.

This option is only available if a hard disk is installed.

To set the job storage limit

1.Press to enter the MENUS.

2.Press to highlight CONFIGURE DEVICE.

3.Press to select CONFIGURE DEVICE.

4.Press to highlight SYSTEM SETUP.

5.Press to select SYSTEM SETUP.

6.Press to select JOB STORAGE LIMIT.

7.Press or to change the value.

8.Press to set the value.

9.Press PAUSE/RESUME.

Job held timeout

This option sets the period of time that the system keeps files in job storage before deleting them from the queue. The default setting for this option is OFF; the other available settings are 1 HOUR, 4 HOURS, 1 DAY, and 1 WEEK.

This option is only available if a hard disk is installed.

To set the job held timeout

1.Press to enter the MENUS.

2.Press to highlight CONFIGURE DEVICE.

3.Press to select CONFIGURE DEVICE.

4.Press to highlight SYSTEM SETUP.

5.Press to select SYSTEM SETUP.

ENWW Changing printer control panel configuration settings 37