6. Release the locks on each side of the DIMM slot.

7.Remove the DIMM from the antistatic package. Locate the alignment notches on the bottom edge of the DIMM.

8.Holding the DIMM by the edges, align the notches on the DIMM with the bars in the DIMM slot.

Note

If you have difficulty inserting the DIMM or closing the latches, make sure the notches on the

 

bottom of the DIMM are aligned with the bars in the slot. If the DIMM still does not go in,

 

make sure you are using the correct type of DIMM.

186 Appendix A Working with memory and print server cards

ENWW