Control panel message

Description

Recommended action

 

 

 

 

 

LOAD TRAY X:

Tray X is either empty or configured for a

1.

Press

for help.

<TYPE> <SIZE>

type and size other than specified in the

2. Follow the instructions on the display

job.

 

 

to load paper or configure the tray.

For help press

 

 

 

 

HP recommends moving the tray

 

 

 

alternates with

 

 

switch to Standard.

LOAD TRAY X:

 

3.

Press

and

to step through the

<TYPE> <SIZE>

 

 

instructions.

 

 

4.

To exit help, press .

Move tray switch to STANDARD

 

 

or

 

 

 

 

To use another

 

 

 

 

 

 

Press

to print from another tray.

tray press

 

 

 

 

 

 

 

 

 

 

Loading

Programs and fonts can be stored on the

No action necessary.

program x

printer file system and are loaded into

 

 

 

 

 

RAM when the printer is turned on. The

 

 

 

 

 

 

 

 

 

 

 

Do not power off

number X specifies a sequence number

 

 

 

 

 

 

indicating the current program being

 

 

 

 

 

 

loaded.

 

 

 

 

 

 

 

 

 

If no paper is in the manual feed

Paper is in Tray 1, but a job sent requires

Press

to print from the tray.

tray:

a specific paper type and size that is not

Or follow the instructions below and load

MANUALLY FEED

currently available.

the correct paper.

 

 

 

<TYPE> <SIZE>

 

1.

Press

for help.

For help press

 

2. Follow the instructions on the display

alternates with

 

 

to load the correct paper.

 

3.

Press

and

to step through the

MANUALLY FEED

 

 

 

instructions.

 

<TYPE> <SIZE>

 

 

 

 

4.

To exit help, press .

To continue press

 

 

 

 

 

 

 

 

 

 

 

MANUALLY FEED

There is no paper in the tray and a job

Press

to print from another tray.

<TYPE> <SIZE>

sent requires a specific paper type and

Or follow the instructions below to load

size that is not currently available through

For help press

Tray 1.

the correct paper.

 

1.

Press

for help.

alternates with

 

 

2.

Follow the instructions on the display

MANUALLY FEED

 

 

 

to load the correct paper.

<TYPE> <SIZE>

 

 

 

3.

Press

and

to step through the

 

 

To use another

 

 

instructions.

 

tray press

 

4.

To exit help, press .

 

 

 

Moving...

The printer is executing a Component

No action necessary.

MP tray solenoid

Test and the component selected is MP

 

 

 

 

 

Tray Feed Solenoid.

 

 

 

 

 

To exit press

 

 

 

 

 

 

 

 

 

 

 

Cancel Job key

 

 

 

 

 

 

 

 

 

 

 

 

 

ENWW

Control panel messages 121