HP LaserJet 5500 manual 139

Control panel message	Description	Recommended action
Resetting	The printer is restoring factory settings.	No action necessary.
factory settings
Resetting	YES was selected in the Reset Supplies	No action necessary.
kit count	menu to reset the counts for any of the
	supplies that cannot be detected as new.
Restoring	The printer is restoring the last saved	No action necessary.
last saved state	state.
Rotating <color>	A component test is in progress; the	Press CANCEL JOB when ready to stop this
cartridge motor	component selected is <color>	test.
	Cartridge motor.
To exit press
Cancel Job key
Rotating...	The printer is executing a Component	Press CANCEL JOB when ready to stop this
alienation motor	Test and the component selected is	test.
	alienation motor.
To exit press
Cancel Job key
Rotating...	The printer is executing a Component	Press CANCEL JOB when ready to stop this
belt drive	Test and the component selected is Belt	test.
	Only.
To exit press
Cancel Job key
Rotating...	The printer is executing a Component	Press CANCEL JOB when ready to stop this
fuser motor	Test and the component selected is	test.
	fuser motor.
To exit press
Cancel Job key
Rotating...	The printer is executing a Component	Press CANCEL JOB when ready to stop this
transfer motors	Test and the component selected is	test.
	TRANSFER MOTORS.
To exit press
Cancel Job key
Rotating	A Scanner Test is in progress.	Press CANCEL JOB when ready to stop this
<color> Laser		test.
To exit press
Cancel Job key
Saving current state	The current state is being saved.	No action necessary.
Setting saved	A menu selection has been saved.	No action necessary.
Test terminated	A diagnostic test has been terminated by	No action necessary.
	pressing the CANCEL JOB button.

ENWW Control panel messages 129