Control panel message

Description

Recommended action

 

 

 

 

 

REINSTALL <COLOR>

The cartridge is not fully seated.

1.

Press

for detailed information.

CARTRIDGE

 

2.

Follow the instructions on the display

alternates with

 

 

to reinstall the cartridge.

 

3.

Press

and

to step through the

For help press

 

 

 

instructions.

 

 

 

 

 

 

 

4.

To exit help, press .

 

 

 

 

 

REINSTALL SUPPLIES

One or more cartridges are not fully

1.

Press

to display which cartridges

alternates with

seated.

 

are not fully seated.

 

2. Follow the instructions on the display

For status press

 

 

 

to reinstall the cartridge(s).

 

 

 

 

 

3.

Press

and

to step through the

 

 

 

instructions.

 

 

 

4.

To exit help, press .

 

 

 

REMOVE ALL

The printer is executing a Component

Remove all print cartridges.

PRINT CARTRIDGES

Test and the component selected is Belt

After diagnostics are complete, reinstall

Only.

To exit press

all print cartridges.

 

 

 

 

 

 

 

 

Cancel Job key

 

 

 

 

 

 

 

 

REMOVE AT LEAST 1

The printer is executing a Disable

Remove one print cartridge.

PRINT CARTRIDGE

Cartridge Check or Component Test

After the test is complete, reinstall the

where the component selected is

 

print cartridge.

 

To exit press

CARTRIDGE MOTOR.

 

 

 

 

 

Cancel Job key

 

 

 

 

 

 

 

 

 

 

REPLACE <COLOR>

The identified print cartridge has reached

1.

Press

for help.

CARTRIDGE

the end of life. Printing will not continue

2.

Follow the instructions on the display

until the cartridge is replaced.

alternates with

 

to locate and install the missing or

 

 

 

 

incorrectly installed print cartridge.

For help press

 

 

 

3.

Press

and

to step through the

 

 

 

 

 

instructions.

 

 

 

4.

To exit help, press .

 

 

Supplies ordering information is also

 

 

available from the embedded Web

 

 

server. See Using the embedded Web

 

 

server for more information.

 

 

 

 

 

 

ENWW

Control panel messages 127