CAUTION

WARNING!

Jam in the top cover

Do not use a sharp object to remove a jam in the fuser. If the fuser is damaged, print quality problems may result.

1. Using the side handles, open the top cover.

2. Firmly pull forward on the two green levers to disengage the fuser rollers.

Do not touch the fuser. It is hot and could cause burns! The fuser operating temperature is 190° C (374° F). Wait 10 minutes to allow the fuser to cool before touching it.

3. Grasp the paper by both corners to remove it, if possible.

154 Chapter 8 Problemsolving

ENWW