Control panel message

Description

 

Recommended action

 

 

 

 

 

 

 

 

 

22 SERIAL I/O

The printer serial buffer has overflowed

1.

Press

to continue printing.

BUFFER OVERFLOW

during a busy state.

 

 

 

 

 

 

 

 

Note

 

 

 

 

 

 

 

 

 

 

To continue

 

 

A loss of data will occur.

 

 

press

 

2.

If the message persists, contact

 

 

 

 

 

 

HP Support.

 

 

 

 

 

 

 

 

 

 

40 BAD SERIAL

A serial data error (parity, framing, or line

1.

Press

to continue printing.

TRANSMISSION

overrun) has occurred while the printer

 

 

 

 

 

 

 

 

Note

 

 

 

 

was receiving data.

 

 

 

 

 

To continue

 

 

A loss of data will occur.

 

 

press

 

2.

If the message persists, contact

 

 

 

 

 

 

HP Support.

 

 

 

 

 

 

 

 

40 EIO X BAD

A connection with the card in EIO slot X

1.

Press

to continue printing.

TRANSMISSION

has been abnormally broken.

 

 

 

 

 

 

 

 

Note

 

 

 

 

 

 

 

 

 

 

To continue

 

 

A loss of data will occur.

 

 

press

 

2.

If the message persists, contact

 

 

 

 

 

 

HP Support.

 

 

 

 

 

 

 

41.3 UNEXPECTED

Paper is loaded which is longer or shorter

1.

Load the paper as instructed.

SIZE IN TRAY X

in the feed direction than the size

2.

If the incorrect size was selected,

configured for the tray.

 

 

 

cancel the job or press

for help.

For help press

 

 

 

 

3.

Press

and

to step through the

alternates with

 

 

 

 

instructions.

 

 

 

LOAD TRAY X:

 

 

 

 

 

 

 

4.

To exit help, press .

 

 

<TYPE> <SIZE>

 

 

 

 

 

 

 

 

 

 

 

For help press

 

 

 

 

 

 

 

 

 

 

 

 

41.5 UNEXPECTED

The printer senses a different paper type

1.

Load the paper as instructed.

TYPE IN TRAY X

in the paper path than what is configured

2.

If the incorrect type was selected,

in the tray.

 

 

 

cancel the job or press

for help.

For help press

 

 

 

 

3.

Press

and

to step through the

alternates with

 

 

 

 

instructions.

 

 

 

LOAD TRAY X:

 

 

 

 

 

 

 

4.

If you are trying to print

 

 

 

 

 

 

<TYPE> <SIZE>

 

 

 

transparencies and the output was

For help press

 

 

 

printed like paper, the OHT sensor

 

 

 

might be dirty. For OHT sensor

 

 

 

 

cleaning instructions, see Periodic

 

 

 

 

cleaning.

 

 

 

 

 

5.

To exit help, press .

 

 

 

 

 

 

 

 

 

 

 

ENWW

Control panel messages 135