Loading undetectable standard or custom-sized paper into Tray 2, Tray 3, and Tray 4

The Tray X size menu will be displayed when the Tray 2, Tray 3, or Tray 4 switch is in the custom size position. You must also change the size setting in the control panel from ANY CUSTOM to CUSTOM, or select the undetectable size.

1. Remove tray from the printer.

2.Move the tray switch to the Custom size position. Once a custom size is set for a tray, it will be retained until the switch is moved back to Standard.

3.Slide the paper width guides all the way open and adjust the rear paper-length guide to the length of the paper being used.

ENWW

Configuring input trays 71