7.Remove the inside sealing tape by breaking the orange tab on the end of the new print cartridge and pulling the tape completely out. Discard the tape.

8.Align the print cartridge with the tracks inside the printer and insert the cartridge until it is completely seated and clicks into place.

Note

If a cartridge is in the wrong slot, the control panel will display the message INCORRECT

 

<COLOR> or INCORRECT SUPPLIES.

 

9.

Close the front cover and then close the top cover. After a short while, the control panel

 

 

should display Ready.

 

10.

Installation is complete. Place the used print cartridge in the box in which the new

 

 

cartridge arrived. See the enclosed recycling guide for recycling instructions.

 

11.

If you are using a non-HP print cartridge, check the control panel for further instructions.

For additional help, go to http://www.hp.com/support/lj5500.

ENWW

Changing print cartridges 107