![](/images/backgrounds/286993/hp-designjet-5500-users-manual-54872774x1.png)
There are three steps to set up custom paper. When all three steps are completed, the display will return to the PAPER HANDLING menu. Once a Custom size is set for a tray, it will be retained until the switch in the tray is moved back to Standard or you can change it in the control panel.
1.Unit of measure
2.X dimension
3.Y dimension
1 Custom/Standard switch
Unit of measure
1.Pressto highlight UNIT OF MEASURE.
2.Pressto select UNIT OF MEASURE.
3.Pressor
to highlight the correct measurement.
4.Pressto select the value.
Y dimension
The Y dimension is the length of the page as it feeds into the printer.
1.Pressto highlight Y DIMENSION.
2.Pressto select Y DIMENSION.
3.Pressor
to highlight the correct value.
4.Pressto select the value. If the value entered is outside the vaild range, INVALID VALUE will appear for two seconds. The display prompts you to enter another value.
X dimension
The X dimension is the width of the page as it feeds into the printer.
1.Pressto highlight X DIMENSION.
2.Pressto select X DIMENSION.
3.Pressor
to highlight the correct value.
4.Pressto select the value. If the value entered is outside the the valid range, INVALID VALUE will appear for two seconds. The display prompts you to enter another value.
64 Chapter 4 Printing tasks | ENWW |