![](/images/backgrounds/286993/hp-designjet-5500-users-manual-548727121x1.png)
Periodic cleaning
To ensure the printer continues to function properly throughout its life, periodic cleaning is necessary.
One area of the printer that must be cleaned periodically is the overhead transparency (OHT) and
The static discharge comb at the top of the printer also needs periodic cleaning. A brush to clean the static discharge comb is stored inside the front cover.
When to clean the OHT sensor●The printer control panel reports paper is being used instead of the desired transparency.
●The images on the front and back of the printed page do not align.
| To clean the OHT sensor | ||
| If these instructions do not remedy the OHT and | ||
Note | |||
| HP support at http://www.hp.com/support. | ||
| 1. Lift the top cover of the printer. | ||
|
|
|
|
|
|
|
|
2.Grasp the front cover and pull down, and then grasp the green handles on the transfer unit and pull down.
ENWW | Periodic cleaning 111 |