HP LaserJet 5500 To set PowerSave Time, To disable/enable PowerSave, OFF, Note, HOURS, MENUS, MENUS, 1 HOUR, RESETS, RESETS, 2 HOURS, 4 HOURS, 1 MINUTE, POWERSAVE, POWERSAVE

10.	Press	or to select ALWAYS or UNLESS LOADED.
11.	Press	to set the behavior.
12.	Press PAUSE/RESUME.

	PowerSave Time
	The adjustable PowerSave Time feature reduces power consumption when the printer has
	been inactive for an extended period. You can set the length of time before the printer goes
	into PowerSave mode to 1 MINUTE, 15 MINUTES, 30 MINUTES, or to 1 HOUR, 1.5
	HOURS, 2 HOURS, or 4 HOURS. The default setting is 30 MINUTES.
	The printer display dims when the printer is in PowerSave mode. PowerSave mode does not
Note
	affect printer warm-up time unless the printer was in PowerSave mode for more than 8 hours.

To set PowerSave Time

1.Press to enter the MENUS.

2.Press to highlight CONFIGURE DEVICE.

3.Press to select CONFIGURE DEVICE.

4.Press to highlight SYSTEM SETUP.

5.Press to select SYSTEM SETUP.

6.Press to highlight POWERSAVE TIME.

7.Press to select POWERSAVE TIME.

8.Press or to select the appropriate time period.

9.Press to set the time period.

10.Press PAUSE/RESUME.

To disable/enable PowerSave

1.Press to enter the MENUS.

2.Press to highlight CONFIGURE DEVICE.

3.Press to select CONFIGURE DEVICE.

4.Press to highlight RESETS.

5.Press to select RESETS.

6.Press to highlight POWERSAVE.

7.Press to select POWERSAVE.

8.Press or to select ON or OFF.

9.Press to set the selection.

10.Press PAUSE/RESUME.

ENWW Changing printer control panel configuration settings 39