Nortel Networks 2300 Series Clear authentication dot1x, Clear authentication last-resort, Wired

AAA Commands 179

success: change accepted.

See Also

•clear authentication admin on page 167

•clear authentication dot1x on page 169

•clear authentication mac on page 170

•clear authentication web on page 171

•set authentication console on page 183

•show aaa on page 210

clear authentication dot1x

Removes an 802.1X authentication rule.

Syntax clear authentication dot1x {ssid ssid-namewired} user-wildcard

ssid ssid-nameSSID name to which this authentication rule applies.

wired Clears a rule used for access over a WSS’s wired-authentication port.

user-wildcardUser-wildcard associated with the rule you are removing.

Defaults None.

Access Enabled.

Examples The following command removes 802.1X authentication for network users with usernames ending in @thiscorp.com who try to access SSID finance:

WSS# clear authentication dot1x ssid finance *@thiscorp.com

See Also

•clear authentication admin on page 167

•clear authentication console on page 168

•clear authentication mac on page 170

•clear authentication web on page 171

•set authentication dot1x on page 185

•show aaa on page 210

clear authentication last-resort

Deprecated in WSS Software Version 5.0. The last-resortuser is not required or supported in WSS Software Version

5.0.Instead, a user who accesses the network on an SSID by using the fallthru access type last-resortis automatically a last-resortuser. The authorization attributes assigned to the user come from the default authorization attributes set on the SSID.

Nortel WLAN—Security Switch 2300 Series Command Line Reference