Nortel Networks 2300 Series Show fdb agingtime, Output for show fdb, WSS# show fdb agingtime

	VLAN Commands 93
	Table 1: Output for show fdb
Field	Description
VLAN	VLAN number.
TAG	VLAN tag value. If the interface is untagged, the TAG field is
	blank.
Dest MAC/Route Des	MAC address of this forwarding entry’s destination.
CoS	Type of entry. The entry types are explained in the first row of the
	command output.
	Note: This Class of Service (CoS) value is not associated with
	WSS Software quality of service (QoS) features.
Destination Ports	WSS port associated with the entry. A switch sends traffic to the
	destination MAC address through this port.
Protocol Type	Layer 3 protocol address types that can be mapped to this entry.
Total Matching FDB Entries	Number of entries displayed by the command.
Displayed

See Also

•clear fdb on page 74

•set fdb on page 77

show fdb agingtime

Displays the aging timeout period for forwarding database entries.

Syntax show fdb agingtime [vlan vlan-id]

vlan vlan-id	VLAN name or number. If you do not specify a VLAN, the aging timeout
	period for each VLAN is displayed.

Defaults None.

Access All.

Examples The following command displays the aging timeout period for all VLANs:

WSS# show fdb agingtime

VLAN 2 aging time = 600 sec

VLAN 1 aging time = 300 sec

Because the forwarding database aging timeout period can be configured only on an individual VLAN basis, the command lists the aging timeout period for each VLAN separately.

Nortel WLAN—Security Switch 2300 Series Command Line Reference