Nortel Networks 2300 Series manual Snmp-engine-id ip ip-addr local hex hex, String Engine

IP Services Commands 147

Syntax set snmp usm usm-usernamesnmp-engine-id {ip ip-addrlocal hex hex-string}

access {read-only read-notify notify-only read-write notify-read-write}auth-type {none md5 sha}

{auth-pass-phrase string auth-key hex-string}encrypt-type {none des 3des aes} {encrypt-pass-phrase string encrypt-key hex-string}

usm-username	Name of the SNMPv3 user. Specify between
	1 and 32 alphanumeric characters, with no
	spaces.
snmp-engine-id {ip ip-addrlocal hex hex-	Specifies a unique identifier for the SNMP
string}	engine.
	To send informs, you must specify the engine
	ID of the inform receiver. To send traps and to
	allow get and set operations and so on,
	specify local as the engine ID.
	• hex hex-string—ID is a
	hexadecimal string.
	• ip ip-addr—ID is based on the IP
	address of the station running the
	management application. Enter
	the IP address of the station. WSS
	Software calculates the engine ID
	based on the address.
	• local—Uses the value computed
	from the switch’s system IP
	address.

Nortel WLAN—Security Switch 2300 Series Command Line Reference