Nortel Networks 2300 Series manual Set radius, See Also set server group on

RADIUS and Server Groups Commands 497

See Also set server group on page 492

set radius

Configures global defaults for RADIUS servers that do not explicitly set these values themselves. By default, the WSS automatically sets all these values except the password (key).

Syntax set radius {deadtime minutes encrypted-key string key string retransmit number timeout seconds}

deadtime minutes	Number of minutes the WSS waits after declaring an
	unresponsive RADIUS server unavailable before retrying the
	RADIUS server. You can specify from 0 to 1440 minutes.
encrypted-key string	Password (shared secret key) used to authenticate to the RADIUS
	server, entered in its encrypted form. You must provide the same
	encrypted password that is defined on the RADIUS server. The
	password can be 1 to 64 characters long, with no spaces or tabs.
	WSS Software does not encrypt the string you enter, and instead
	displays the string in show config and show aaa output exactly
	as you entered it.
	Note: Use this option only if you are entering the key in its
	encrypted form. To enter the key in unencrypted form, use the
	key string option instead.
key string	Password (shared secret key) used to authenticate to the RADIUS
	server, entered in its unencrypted form. You must provide the
	same password that is defined on the RADIUS server. The
	password can be 1 to 64 characters long, with no spaces or tabs.
	WSS Software encrypts the displayed form of the string in show
	config and show aaa output.
	Note: Use this option only if you are entering the key in its
	unencrypted form. To enter the key in encrypted form, use the
	encrypted-keystring option instead.
retransmit number	Number of transmission attempts the WSS makes before
	declaring an unresponsive RADIUS server unavailable. You can
	specify from 1 to 100 retries.
timeout seconds	Number of seconds the WSS waits for the RADIUS server to
	respond before retransmitting. You can specify from 1 to 65,535.

Defaults Global RADIUS parameters have the following default values:

•deadtime—0 (zero) minutes (The WSS does not designate unresponsive RADIUS servers as unavailable.)

•encrypted-key—No key

•key—No key

•retransmit—3 (the total number of attempts, including the first attempt)

•timeout—5 seconds

Access Enabled.

Nortel WLAN—Security Switch 2300 Series Command Line Reference