Nortel Networks 2300 Series manual Clear port-group, Clear port media-type

Port Commands 35

See Also

•monitor port counters on page 28

•show port counters on page 46

clear port-group

Removes a port group.

Syntax clear port-group name name

name name Name of the port group.

Defaults None.

Access Enabled.

Examples The following command clears port group server1:

WSS# clear port-group name server1

success: change accepted.

See Also

•set port-group on page 35

•show port-group on page 47

clear port media-type

Disables the copper interface and reenables the fiber interface on a 2380 gigabit Ethernet port.

Syntax clear port media-type port-list

port-list	List of physical ports. WSS Software disables the copper interface and
	reenables the fiber interface on all the specified ports.

Defaults The GBIC (fiber) interface is enabled, and the copper interface is disabled, by default. Access Enabled.

History Introduced in WSS Software Version 4.0.

Usage This command applies only to the 2380. This command does not affect a link that is already active on the port.

Examples The following command disables the copper interface and reenables the fiber interface on port 2:

2380# clear port media-type 2

Nortel WLAN—Security Switch 2300 Series Command Line Reference