Nortel Networks 2300 Series manual Show ap config, Output for show ap arp

354AP Commands

	Table 6: Output for show ap arp
Field	Description
Host	IP address, hostname, or alias.
HW Address	MAC address mapped to the IP address, hostname, or alias.
VLAN	VLAN the entry is for.
State	Entry state:
	• RESOLVING—WSS sent an ARP request for the entry and
		is waiting for the reply.
	•	RESOLVED—Entry is resolved.
	•	EXPIRED—Entry is expired.
Type	Entry type:
	• DYNAMIC—Entry was learned from network traffic and
		ages out if unused for longer than the ARP aging timeout.

• LOCAL—Entry for the WSS MAC address. Each VLAN has one local entry for the switch MAC address.

• PERMANENT—Entry does not age out and remains in the configuration even following a reboot.

• STATIC—Entry does not age out but is removed after a reboot.

See Also

•set ap local-switching mode on page 260

•set vlan-profile

show ap config

Displays global and radio-specific settings for an AP.

Syntax show ap config [port-list[radio {1 2}]]

port-list	List of ports connected to the AP(s) for which to display configuration
	settings.
ap-num	Number of a AP for which to display configuration settings.
radio 1	Shows configuration information for radio 1.
radio 2	Shows configuration information for radio 2. (This option does not apply
	to single-radio models.)
Defaults	None.

NN47250-100 (Version 02.51)