Nortel Networks 2300 Series manual Set ip alias, Set ip dns, Syntax set ip alias name ip-addr

IP Services Commands 123

Defaults IP interfaces are enabled by default.

Access Enabled.

Examples The following command disables the IP interface on VLAN mauve:

WSS# set interface mauve status down success: set interface mauve to down

See Also

• clear interface on page 99

• set interface on page 109

• show interface on page 149

set ip alias

Configures an alias, which maps a name to an IP address. You can use aliases as shortcuts in CLI commands.

Syntax set ip alias name ip-addr

name	String of up to 32 alphanumeric characters, with no spaces.
ip-addr	IP address in dotted decimal notation.
Defaults	None.
Access	Enabled.

Examples The following command configures the alias HR1 for IP address 192.168.1.2:

WSS# set ip alias HR1 192.168.1.2 success: change accepted.

See Also

•clear ip alias on page 100

•show ip alias on page 150

set ip dns

Enables or disables DNS on a WSS.

Syntax set ip dns {enable disable}

enable	Enables DNS.
disable	Disables DNS.

Defaults DNS is disabled by default.

Nortel WLAN—Security Switch 2300 Series Command Line Reference