Nortel Networks 2300 Series manual Show rfdetect clients mac Output

	RF Detection Commands 531
	Table 1: show rfdetect clients Output (continued)
Field	Description
AP Vendor	Company that manufactures or sells the AP with which the rogue
	client is associated.
Port/Radio/Channel	Port number, radio number, and channel number of the radio that
	detected the rogue. For a AP, the connection number is labeled
	ap. (This stands for ap.)
NoL	Number of listeners. This is the number of AP radios that
	detected the rogue client.
Type	Classification of the rogue device:
	• rogue—Wireless device that is on the network but
	is not supposed to be on the network.
	• intfr—Wireless device that is not part of your
	network and is not a rogue, but might be causing
	RF interference with AP radios.
	• known—Device that is a legitimate member of the
	network.
Last seen	Number of seconds since an AP radio last detected 802.11
	packets from the device.
	Table 2: show rfdetect clients mac Output
Field	Description
RSSI	Received signal strength indication (RSSI)—the strength of the
	RF signal detected by the AP radio, in decibels referred to
	1 milliwatt (dBm).
Rate	The data rate of the client.
Last Seen	Number of seconds since an AP radio last detected 802.11
	packets from the device.
BSSID	MAC address of the SSID with which the rogue client is
	associated.
Vendor	Company that manufactures or sells the AP with which the rogue
	client is associated.

Nortel WLAN—Security Switch 2300 Series Command Line Reference