Nortel Networks 2300 Series Traceroute, WSS-remote Session 0 pty tty2.d terminated tt name tty2.d

IP Services Commands 173

When the administrator presses Ctrl+t to end the Telnet connection, the management session returns to the local WSS prompt:

WSS-remote> Session 0 pty tty2.d terminated tt name tty2.d

WSS#

See Also

•clear sessions on page 435

•show sessions on page 437

traceroute

Traces the route to an IP host.

Syntax traceroute host [dnf] [no-dns] [port port-num] [queries num] [size size] [ttl hops] [wait ms]

host	IP address, hostname, or alias of the destination host. Specify the IP
	address in dotted decimal notation.
dnf	Sets the Do Not Fragment bit in the ping packet to prevent the packet
	from being fragmented.
no-dns	Prevents WSS Software from performing a DNS lookup for each hop to
	the destination host.
port port-num	TCP port number listening for the traceroute probes.
queries num	Number of probes per hop.
size size	Probe packet size in bytes. You can specify from 40 through 1460.
ttl hops	Maximum number of hops, which can be from 1 through 255.
wait ms	Probe wait in milliseconds. You can specify from 1 through 100,000.

Defaults

•dnf—Disabled

•no-dns—Disabled

•port—33434

•queries—3

•size—38

•ttl—30

•wait—5000

Access All.

Usage To stop a traceroute command that is in progress, press Ctrl+C.

Examples The following example traces the route to host server1:

Nortel WLAN—Security Switch 2300 Series Command Line Reference