Nortel Networks 2300 Series manual Clear network-domain mode, Clear network-domain peer

236Network Domain Commands

See Also

• set network-domain mode member seed-ip on page 227

• set network-domain peer on page 228

• set network-domain mode seed domain-name on page 229

clear network-domain mode

Removes the Network Domain seed or member configuration from the WSS.

Syntax clear network-domain mode {seed member}

seed	Clears the Network Domain seed configuration from the WSS.
member	Clears the Network Domain member configuration from the WSS.
Defaults	None.
Access	Enabled.

History Introduced in WSS Software 4.1.

Usage This command has no effect if the WSS is not configured as part of a Network Domain.

Examples The following command clears the Network Domain member configuration from the WSS:

23x0# clear network-domain mode member success: change accepted.

The following command clears the Network Domain seed configuration from the WSS:

23x0# clear network-domain mode seed success: change accepted.

See Also

•set network-domain mode member seed-ip on page 227

•set network-domain mode seed domain-name on page 229

clear network-domain peer

Removes the configuration of a Network Domain peer from a WSS configured as a Network Domain seed.

Syntax clear network-domain peer {ip-addrall}

ip-addr	IP address of the Network Domain peer in dotted decimal notation.
all	Clears the Network Domain peer configuration for all peers from the
	WSS.

NN47250-100 (Version 02.51)