Nortel Networks 2300 Series manual Set radio-profile service-profile

308AP Commands

set radio-profile service-profile

Maps a service profile to a radio profile. All radios that use the radio profile also use the parameter settings, including SSID and encryption settings, in the service profile.

Syntax set radio-profile name service-profile name

radio-profilename Radio profile name of up to 16 alphanumeric characters, with no spaces.

service-profilename Service profile name of up to 16 alphanumeric characters, with no spaces.

Defaults A radio profile does not have a service profile associated with it by default. In this case, the radios in the radio profile use the default settings for parameters controlled by the service profile. Table 38 lists the parameters controlled by a service profile and their default values.

Table 5: Defaults for Service Profile Parameters

		Radio Behavior When
Parameter	Default Value	Parameter Set To
		Default Value
attr	No attributes configured	Does not assign the SSID’s
		authorization attribute values to
		SSID users, even if attributes are
		not otherwise assigned.
auth-dot1x	enable	When the Wi-Fi Protected Access
		(WPA) information element (IE)
		is enabled, uses 802.1X to
		authenticate WPA clients.
auth-fallthru	none	Denies access to users who do not
		match an 802.1X or MAC
		authentication rule for the SSID
		requested by the user.
auth-psk	disable	Does not support using a
		preshared key (PSK) to
		authenticate WPA clients.
beacon	enable	Sends beacons to advertise the
		SSID managed by the service
		profile.
cac-mode	none	Does not limit the number of
		active user sessions based on Call
		Admission Control (CAC).
cac-session	14	If session-based CAC is enabled
		(cac-mode is set to session),
		limits the number of active user
		sessions on a radio to 14.

NN47250-100 (Version 02.51)