Nº53 Power Amplifier
Status Reporting
Fault Reporting
The Nº53 slave(s) can report the following status information to the master device:
•Temp (Temperature) – the current operating temperature of the amplifier(s).
•Session Time – the amount of time that the amplifier(s) has been powered on.
•Total On Time – the total amount of hours that the Nº53 amplifier(s) has been powered on since its manufacture.
If a slave device is inactive, unassigned, or assigned to a different master, then status information is not available.
The Nº53 slave(s) also reports fault information to the master device. If a slave device is inactive, unassigned, or assigned to a different master, then error reporting is not available. For more information about possible fault conditions, refer to the “Troubleshooting” section of the manual.
23
