Nº53 Power Amplifier
Network Setup for Windows XP
1.From the Start menu, select Control Panel.
2.
3.
4.Click the Properties button to open the Local Area Connection Properties menu. If the computer is not currently connected to an active network, Step 3 has already opened the Local Area Connection Properties menu.
5.Click on the Internet Protocol (TCP/IP) line item so that it is highlighted.
6.Click the Properties button.
7.Select the “Use the following IP address” option. The IP address, Subnet mask, and Default gateway boxes are no longer grayed out and can now be modified.
8.Enter the following values:
•IP address: 192.168.50.x – where x stands for a number other than 0, 4, or 255
•Subnet mask: 255.255.255.0
•Do not enter a value in the Default gateway parameter
| The computer must have a unique address and be on the same | 17 |
| subnet as the amplifier. | |
|
| |
9. | Click “OK” to save and exit the menu. |
|
10. | Open the Internet Explorer Web browser. |
|
11. | From the menu bar, select the Tools Internet Options menu. |
|
12.Select the Connections tab.
13.Click the LAN Settings button.
14.Verify that “Use a proxy server for your LAN” is NOT checked.
15.Click “OK” to save and exit the menu.
Network Setup for Windows 2000
1. From the Start menu, select Settings Control Panel.
2.
3.
4.Click the Properties button to open the Local Area Connection Properties menu. If the computer is not currently connected to an active network, Step 3 has already opened the Local Area Connection Properties menu.
5.Click on Internet Protocol (TCP/IP) line item so that it is highlighted.
6.Click the Properties button.