Mark Levinson
5.The Home tab of the amplifier’s internal Web page is now displayed. The tab is in red text to indicate that it is the current page.
6.Observe that the Status section of the Web page identifies the host name of the amplifier. The host name can be modified, but only the first eight characters are affected; anything after the underscore may not be modified.
To change the host name of the amplifier:
A.Type the new name into the white box to the right of the parameter. The new name must be made from the capital letters, A to Z, and the numbers, 0 to 9. Underscores may also be used. Only eight characters are allowed.
Note The host name MUST start with an
B. Click the Submit button to save the new value.
C. Click the Refresh button in the Status section of the Web page to observe the new host name.
7. Observe that the Status section of the Web page also identifies
20the static IP address of the amplifier. The static IP address can be
modified, if desired.
To change the IP address of the amplifier:
A. Type the new IP address into the white box to the right of the parameter.
B. Click the Submit button to save the new value.
C. Enter the new IP address of the amplifier into the browser. The amplifier Web page loads, reflecting the new information.
The network connection is now complete.