Mark Levinson 53 owner manual Specifications, See Dimensions diagram on the next page

Mark Levinson

		Specifications
		All specifications are subject to change without notice.
	Input & Output Connectors	• one balanced XLR input
		• one unbalanced RCA input
		• two pairs of “Hurricane” loudspeaker output binding posts with
		banana-plug sockets (banana-plug socket not available for some
		models)
	Control Connectors	• two Link2 ports (one input and one output)
		• one Ethernet port
		• one 3.5mm mono (tip/sleeve) mini plug trigger input, 3-12Vdc
		• one 3.5mm mono (tip/sleeve) mini plug trigger output, 3-12Vdc
		• 3-pin IEC standard power connector
	Rated Output Power	500W @ 8 Ω, 1000W @ 4 Ω
		Power ratings are measured as rms power from 20Hz to 20kHz with
		no more than 0.1% THD.
	Frequency Response	within +0.1dB from 10Hz to 20kHz
	Signal to Noise Ratio	–85dB, reference level: 2.83 Vrms (1W @ 8 Ω)
30	Input Impedance	100 kΩ (balanced); 50 kΩ (unbalanced)
	Voltage Gain	26.8dB
	Input Sensitivity	2.89V for maximum rated output power
	Power Requirements	100V∼, 120V∼, 230V∼, 640W, factory set for destination country
	Dimensions*	• Height: 20.87 in (530mm)
		• Width: 8.42 in (214mm)
		• Depth: 20.4 in (518mm)
		*See Dimensions diagram on the next page.
	Weight	• Net weight: 135 lbs (61.24kg)
		• Shipping weight: 165 lbs (74.84kg)
	Operating Environment	• Operating temperature: 0o to 35oC (32o to 95oF)
		• Storage temperature: –30oto 75oC (–22oto 167oF)
		• Relative humidity: 95% maximum without condensation