Nortel Networks 2300 Series manual Set service-profile load-balancing-exempt

328AP Commands

Syntax set service-profile name keep-initial-vlan {enable disable}

name	Service profile name.
enable	Enables radios to leave a roamed user on the same VLAN instead of
	reassigning the VLAN.
disable	Configures radios to reassign a roamed user’s VLAN.

Defaults This option is disabled by default. Access Enabled.

History Introduced in WSS Software Version 5.0.

Usage Even when this option is enabled, the WSS to which a user roams (the roamed-toswitch) can reassign the VLAN in any of the following cases:

•A location policy on the local switch reassigns the VLAN.

•The user is configured in the switch’s local database and the VLAN-Name attribute is set on the user or on a user group the user is in.

•The access rule on the roamed-to switch uses RADIUS, and the VLAN-Name attribute is set on the RADIUS server.

Examples The following command enables the keep-initial-vlanoption on service profile sp3:

WSS# set service-profile sp3 keep-initial-vlan enable

success: change accepted.

See Also show service-profile on page 380

set service-profile load-balancing-exempt

Exempts a service profile from performing RF load balancing.

Syntax set service-profile name load-balancing-exempt {enable disable}

name	Service profile name.
enable	Exempts the specified service profile from RF load balancing.
disable	If a service profile has previously been exempted from RF load balancing,
	restores RF load balancing for the service profile.

Defaults AP radios automatically perform RF load balancing for all service profiles. Access Enabled.

History Introduced in WSS Version 6.0.

NN47250-100 (Version 02.51)