Nortel Networks 2300 Series Security unsecured authenticated encrypted, Retries num, Timeout num

142IP Services Commands

retries num	Specifies the number of times the WSS Software
	SNMP engine will resend a notification that has not
	been acknowledged by the target. You can specify
	from 0 to 3 retries.
timeout num	Specifies the number of seconds WSS Software waits
	for acknowledgement of a notification. You can
	specify from 1 to 5 seconds.

SNMPv3 with Traps

To configure a notification target for traps from SNMPv3, use the following command:

Syntax set snmp notify target target-num ip-addr[:udp-port-number]usm trap user username

[profile profile-name]

[security {unsecured authenticated encrypted}]

target-num	ID for the target. This ID is local to the WSS and does
	not need to correspond to a value on the target itself.
	You can specify a number from 1 to 10.
ip-addr[:udp-port-number]	IP address of the server. You also can specify the UDP
	port number to send notifications to.
username	USM username. This option is applicable only when
	the SNMP version is usm.
profile profile-name	Notification profile this SNMP user will use to specify
	the notification types to send or drop.

security {unsecured authenticated encrypted}

Specifies the security level, and is applicable only when the SNMP version is usm:

•unsecured—Message exchanges are not authenticated, nor are they encrypted. This is the default.

•authenticated—Message exchanges are authenticated, but are not encrypted.

•encrypted—Message exchanges are authenticated and encrypted.

NN47250-100 (Version 02.51)