Nortel Networks 2300 Series manual Set server group, Members server

502RADIUS and Server Groups Commands

Examples To set a RADIUS server named RS42 with IP address 198.162.1.1 to use the default accounting and authorization ports with a timeout interval of 30 seconds, two transmit attempts, 5 minutes of dead time, a key string of keys4u, and the default authorization password of nortel, type the following command:

23x0# set radius server RS42 address 198.162.1.1 timeout 30 retransmit 2 deadtime 5 key keys4U

See Also

•set authentication admin on page 182

•set authentication console on page 183

•set authentication dot1x on page 185

•set authentication mac on page 189

•set authentication web on page 191

•set radius on page 487

•set server group on page 492

•show aaa on page 210

set server group

Configures a group of one to four RADIUS servers.

Syntax set server group group-name members server-name1 [server-name2][server-name3][server-name4]

group-name		Server group name of up to 32 characters, with no spaces or tabs.
members server-		The names of one or more configured RADIUS servers. You can enter up
name1		to four server names.
server-name2
server-name3
server-name4
Defaults	None.
Access	Enabled.

History Introduced in WSS Software 1.0.

Usage You must assign all group members simultaneously, as shown in the example. To enable load balancing, use set server group load-balance enable.

Do not use the same name for a RADIUS server and a RADIUS server group.

Examples To set server group shorebirds with members heron, egret, and sandpiper, type the following command:

23x0# set server group shorebirds members heron egret sandpiper

success: change accepted.

NN47250-100 (Version 02.51)