Nortel Networks 2300 Series manual Set service-profile soda logout-page

338AP Commands

This functionality occurs only when the enforce checks option is enabled for the service profile. The enforce checks option is enabled by default.

The page is assumed to reside in the root directory on the WSS. You can optionally specify a different directory where the page resides.

Examples The following command specifies failure.html as the page to load when a client fails the SODA agent checks:

WSS# set service-profile sp1 soda failure-page failure.html success: change accepted.

The following command specifies failure.html, in the soda-filesdirectory, as the page to load when a client fails the SODA agent checks:

WSS# set service-profile sp1 soda failure-page soda-files/failure.html success: change accepted.

See Also

• set service-profile soda enforce-checks on page 326

• set service-profile soda remediation-acl on page 330

• show service-profile on page 380

set service-profile soda logout-page

Specifies a page on the WSS that is loaded when a client logs out of the network by closing the SODA virtual desktop.

Syntax set service-profile name soda logout-page page

name	Service profile name.
page	Page that is loaded when the client closes the SODA virtual desktop.
Defaults	None.
Access	Enabled.

History Introduced in WSS Software Version 4.1.

Usage When a client closes the SODA virtual desktop, the client is automatically disconnected from the network. You can use this command to specify a page that is loaded when the client closes the SODA virtual desktop.

The client can request this page at any time, to ensure that the client’s session has been terminated. You can add the IP address of the WSS to the DNS server as a well-known name, and you can advertise the URL of the page to users as a logout page.

The page is assumed to reside in the root directory on the WSS. You can optionally specify a different directory where the page resides.

Note that you must also enable the HTTPS server on the WSS, so that clients can log out of the network and access the logout page using HTTPS. To do this, use the set ip https server enable command.

NN47250-100 (Version 02.51)