Sharp UX-A260 manual Special Functions, Caller ID Requires Subscription to Service

6. Special Functions

Caller ID (Requires Subscription to Service)

If you subscribe to a caller identification service from your telephone company, you can set your fax machine to display the name and number of the caller while the fax rings.

Important:

♦To use this function, you must subscribe to a caller identification service from your telephone company. Note that the machine may not be compatible with some caller identification services.

♦Area Code mode: This step is needed if your telephone exchange cannot dial a local phone number (within your calling area code) when the area code is dialed with the phone number (see Step 5).

1	Press FUNCTION once and			once.	Display:
					OPTION SETTING
2
	Press		once and	5 times.	CALLER-ID
3
	Press		once.
					1=YES, 2=NO
4
	Press	1	(YES) to turn on Caller ID.		AREA CODE # MODE
	(To turn off Caller ID, press 2 and go
					1=SET, 2=CLEAR
	to Step 8.)
5
	Press	1	to select SET.
					ENTER AREA CODE
	(To clear a previously set area code,
	press	2	and go to Step 8.)

Note: Entering your area code in this step causes it to be automatically removed from local numbers in the Caller ID list (page 69). This is only required if you need to eliminate dialing of the area code when dialing a local number from the list.

Example (using the area code “123”): If Step 5 is skipped, the Caller ID display will show 123-444-1234, and the number that will dial from the Caller ID list is 123- 444-1234. If the area code 123 is entered in Step 5, the Caller ID display will show 444-1234, and the number that will dial from the Caller ID list is 444-1234.

6. Special Functions

67