Sharp UX-A260 manual Sending a Fax by Automatic Dialing

Sending a Fax by Automatic Dialing

5 When you hear the fax tone, press START/MEMORY . Replace the handset.

•If the transmission is completed successfully, the fax will beep once.

•If an error occurs, the fax will beep three times and print a Transaction Report to inform you of the problem (see page 77).

Note: If the transmission is unsuccessful and DOCUMENT JAMMED appears in the display, remove the document as explained on page 89. (This may occur if the other fax machine doesn’t respond properly when you attempt to send the document.)

Sending a Fax by Automatic Dialing

You can store up to 40 fax or phone numbers in the machine for automatic dialing. When you store a number, you select a two-digit Speed Dial number for it.

♦ Auto-dial numbers are dialed by pressing	SPEED
	, entering the two-digit

Speed Dial number, and then pressing START/MEMORY .

♦You can also search for an auto-dial number by pressing or until the desired number appears in the display, and then START/MEMORY to dial it.

Storing fax and phone numbers for automatic dialing

1 Press FUNCTION once and once.

Display:

<NEW NUMBER>

48